Traxxas Axle Carriers Use Larger 6 X 1

These are the Optional Axle Carriers L & R for
usage on the Traxxas Revo series.

FEATURES:
Nylon Building
Black in Color
Enables Oversized Bearing use

INCLUDES:
One Left Axle Provider
One Right Axle Provider
4 Dust Boot Retainers
Two Bearing Spacers

NEEDS:
Setup

Right here is a terrific item that numerous others have actually purchased the same time.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building
Blue and Black in Color

INCLUDES:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Instruction sheet

NEEDS:
Two bundles needed to complete truck

Get this item to improve the one you read about.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Hub Ball Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless-steel Building
Blue Rubber Sealed

INCLUDES:
Two 12mm x 18mm Blue Sealed Stainless Wheel Hub Bearings

NEEDS:
Assembly onto Automobile

SPECIFICATIONS:
Outer Diameter: 18mm (0.70")
Inner Diameter: 12mm (0.47")
Thickness: 4mm (0.15")

COMMENTS:
These are for the Inside of the Wheel Hubs, the Truck Requires
4 Total of these Bearings.

Get this item to improve the one you read about.

Bbs Blue Rubber Sealed 6 X 13M

This is a set of Traxxas 6x13x5mm Ball Bearings
for usage on the E-Revo

FUNCTIONS:
Stainless-steel bearing building
Blue rubber dirt shields

INCLUDES:
(2) 6x13x5mm ball bearings Part #5180

SPECIFICATIONS:
Inside size: 6mm (0.24")
Outside size: 13mm (0.51")
Width: 5mm (0.20")

Want an additional terrific item to compliment the above discussed item?

Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FUNCTIONS:
Totally put together
Plastic telescoping driveshaft with steel universals
Blue rubber boot shields telescoping sections from dirt
Attaches to the differential with one screw pin
Functions on the front or rear, right or left of automobile

INCLUDES:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Instruction sheet

NEEDS:
Installing on chassis

Numerous others have actually gotten this item together with the item that you are currently checking out.

Yokes Diff/Tranny

These are the Diff and Trans Drive Yokes for the Traxxas T-Maxx 3.3. TRAC78**

FUNCTIONS:
Black plastic building

INCLUDES:
Two drive yokes
Two 4x15mm Yoke pins

NEEDS:
T-Maxx 3.3

SPECIFICATIONS:
Length: 15/16" (23mm)
Diameter: 3/4" (17mm)

The listed below item additionally pairs really well with the item being gone over.

Pivot Balls W/Cap

These are the Pivot Balls and Pivot Ball Cap Bushings for the
Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks.
Two of these pivot balls suit the axle carriers at each wheel
    The pivot ball cap bushings fit between the pivot balls
and the aluminum caps.

FEATURES:
Changes stock pivot balls and pivot ball cap bushings.
Pivot balls are made of steel, pivot ball cap bushings are made of
    plastic.

INCLUDES:
4 pivot balls.
Four pivot ball cap bushings

NEEDS:
Threading the pivot balls through the axle carriers and into the
    suspension arms. Placing pivot ball cap bushings between the pivot
    balls and aluminum caps.