Traxxas Attachment Screws

    This is a Package of 3x12x5mm Shoulder Screws for lots of
Traxxas Vehicles.

FEATURES:
Black steel building
Screws are half-threaded/half-smooth
Phillips head

CONSISTS OF:
6 3x12x5mm shoulder screws

SPECIFICATIONS:
Length: 12mm (.47")
Size: 3mm (.12")
Thread Length: 5mm (.20")

Get this product to enhance the one you read around.

Shock Tower

This is the Shock Tower for the all variations of the Traxxas T-Maxx.
This is for rectangular body posts.

FEATURES:
Plastic building

CONSISTS OF:
(1) Shock Tower

REQUIRES:
Installation

SPECIFICATIONS:
Width: 4.15" (105.5mm)
Height: 2.3" (58.5mm)
Thickness: 0.323" (8.2mm)

Here is a fantastic product that many others have actually purchased the same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

Regularly gotten with the product that you are presently reading about.

Bulkhead Crossbrace

These are the Replacement Bulkhead Cross Braces for the Traxxas E-Maxx.
These Braces lie between the bumper mounts.

FEATURES:
Black nylon building

CONSISTS OF:
2 Bulkhead Cross Braces
8 3x25mm round head screws

REQUIRES:
Installation onto and E-Maxx.

SPECIFICATIONS:
Mounting holes on-center: 19mm
Bulkhead width: 29mm
Bulkhead height: 28mm

Many others have actually gotten this product along with the product that you are presently reading about.

Screw Pin Set (R)

This is the replacement screw pin (or hinge pins) for the Traxxas Stampede
and Rustler trucks. They are built of chrome-plated steel and used to
hold the suspension arms to the chassis and the hubs.

PACKAGE
INCLUDE:
2 3mm x 46mm screw pins
2 3mm x 40mm screw pins
2 3mm x 29mm screw pins
2 2mm x 27mm screw pins
2 2mm x 24mm screw pins

This product is regularly gotten with the above discussed product.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building

CONSISTS OF:
2 Front bearing (center) carriers
2 RPM decals

REQUIRES:
(4) 5x11mm bearings, if required use (2) DTXC1547.

Regularly gotten with the product that you are presently reading about.

4Mm Alum Flanged Nylock Nuts Blue (4)

These are the 4mm Flanged Nylon Locknuts from Traxxas.

FEATURES:
Aluminum building anodized blue in color
Serrated on the back for sure grip

CONSISTS OF:
4 4mm Flanged Nylon Locknuts

REQUIRES:
6mm nut motorist

SPECIFICATIONS:
Hole Size: 4mm
Hex Size: 6mm

This is a great enhancement to the product presently being discussed.

4X12mm Screws Cntrsnk (Hex Drive) (6)

These are the Traxxas Countersunk 4 x 12mm Screws.

FEATURES:
Metal building
Black in color

CONSISTS OF:
6 4 x 12mm Countersunk Flathead Hex Screws

REQUIRES:
Installation on the vehicle

The below product likewise pairs truly well with the product being discussed.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FEATURES:
Made from stainless-steel
This is used to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electrical
(not Nitro) Rustler
Also called the vertical kingpin

CONSISTS OF:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97