Traxxas Attachment Screws

    This is a Bundle of 3x12x5mm Shoulder Screws for lots of
Traxxas Vehicles.

FEATURES:
Black steel building
Screws are half-threaded/half-smooth
Phillips head

CONSISTS OF:
Six 3x12x5mm shoulder screws

SPECS:
Length: 12mm (.47")
Size: 3mm (.12")
Thread Length: 5mm (.20")

Get this thing to boost the one you are reading about.

Shock Tower

This is the Shock Tower for the all versions of the Traxxas T-Maxx.
This is for rectangular body posts.

FEATURES:
Plastic building

CONSISTS OF:
(1) Shock Tower

REQUIRES:
Installation

SPECS:
Width: 4.15" (105.5mm)
Height: 2.3" (58.5mm)
Density: 0.323" (8.2mm)

Right here is a excellent thing that lots of others have bought at the very same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Often bought with the thing that you are presently reviewing.

Bulkhead Crossbrace

These are the Replacement Bulkhead Cross Braces for the Traxxas E-Maxx.
These Braces lie in between the bumper mounts.

FEATURES:
Black nylon building

CONSISTS OF:
Two Bulkhead Cross Braces
8 3x25mm round head screws

REQUIRES:
Installation onto and E-Maxx.

SPECS:
Mounting holes on-center: 19mm
Bulkhead width: 29mm
Bulkhead height: 28mm

Many others have bought this thing along with the thing that you are presently reviewing.

Screw Pin Set (R)

This is the replacement screw pin (or hinge pins) for the Traxxas Stampede
and Rustler trucks. They are constructed of chrome-plated steel and used to
hold the suspension arms to the chassis and the hubs.

PACKAGE
INCLUDE:
Two 3mm x 46mm screw pins
Two 3mm x 40mm screw pins
Two 3mm x 29mm screw pins
Two 2mm x 27mm screw pins
Two 2mm x 24mm screw pins

This thing is often bought with the above stated thing.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building

CONSISTS OF:
Two Front bearing (center) carriers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

Often bought with the thing that you are presently reviewing.

4Mm Alum Flanged Nylock Nuts Blue (4)

These are the 4mm Flanged Nylon Locknuts from Traxxas.

FEATURES:
Aluminum building anodized blue in color
Serrated on the back for sure grip

CONSISTS OF:
4 4mm Flanged Nylon Locknuts

REQUIRES:
6mm nut motorist

SPECS:
Hole Size: 4mm
Hex Size: 6mm

This is a wonderful enhancement to the thing presently being reviewed.

4X12mm Screws Cntrsnk (Hex Drive) (6)

These are the Traxxas Countersunk 4 x 12mm Screws.

FEATURES:
Metal building
Black in color

CONSISTS OF:
Six 4 x 12mm Countersunk Flathead Hex Screws

REQUIRES:
Installation on the vehicle

The below thing likewise pairs really well with the thing being reviewed.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FUNCTIONS:
Made of stainless steel
This is used to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electrical
(not Nitro) Rustler
Likewise called the vertical kingpin

CONSISTS OF:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97