Traxxas Aton Plus Quad-Rotor Rtf W/2.4Ghz Radio, 2-D Gimbal, Power Cell

    This is the Electric Powered, 2.4GHz Radio Controlled
Ready to Fly Aton Plus Quadcopter from Traxxas.
**Differences in between Aton design #7908 and Aton Plus #7909:**
Aton
3000mAh 3-Cell LiPo iD Battery
*Cam Mounting Bracket Only
Aton Plus
5000mAh 3-Cell Power Cell LiPo iD Battery
*2-Axis Gimbal w/Cam Mount

**Camera Not Included with Either Design**

FEATURES:
Ability Level: 1, needs no previous R/C airplane experience, no
    made complex setup or calibration needed
Return to Home: Activates if radio signal is lost, or if button
    is continued transmitter
Car Take Off: Raises Aton about 10' (3.05m) off of ground waiting for
next command
Traxxas Flight Link: Enables pilot to use their Apple iOS or Android
    to customize flight settings such as geofence radius, control rates
    and more
Flight Modes: Three, Movie, Sport and Expert
Air Brakes: Functions in Sport and Expert modes to stop and hover to
    enable pilot to prepare their next relocation
Main Frame: Molded composite
Motors: Sensorless brushless outrunner
Radio: 2.4GHz 6-channel multi mode
Lighting: High exposure LED offers pilot directional orientation
Status Bar: 4 on-board LEDs, Power On, Satellite Link Established
    Return to Home Place Set and System Status
Cam Mount: 2-axis gimbal developed for usage with GoPro action
    cameras (cam not consisted of)
Battery: 5000mAh 11.1V THREE LiPo 20C discharge rate, Traxxas iD
    battery charger compatible
Battery Charger: 3A A/C powered, charges consisted of battery in
    approximately 1 hour
Landing Gear: Eliminates quickly to minimize weight if cam is not
    installed
Application Support: Open source software components compatible with
    applications such as Mission Organizer (www.dronecode.org) that
    enable pilots to see their flights on satellite maps, needs
    Micro SD card (offered independently) to catch flight logs

INCLUDES:
Ready to Fly Aton Quadcopter, Gimbal w/Camera Mount, Battery,
    Charger, Landing Gear, Spare Rotor Blade Set and Hardware, four
    AAA Batteries, Instruction Manual

SPECIFICATIONS:
Blade Circle: 22.83" (580mm)
Rotor Size: 8.27" (210mm)
Rotor Hub Range Vertical: 10.30" (262mm)
Rotor Center Range Diagonal: 14.57" (370mm)
Width: 18.57" (472mm)
Overall Height: 3.70" (94mm)
Height with Landing Gear: 8.57" (218mm)
Ground Clearance: 0.11" (3mm)
Ground Clearance with Landing Gear: 4.87" (124mm)
Flight Weight: 30.33oz (860g)
Flight System: Car leveling, six axis
Flying Variety: Approximately 500' (150m)
Radio System: 2.4GHz 6-channel, multi mode
Flight Time w/o Cam: 25-28 minutes
Flight Time w/GoPro HERO 4 Cam: 20-25 minutes
    (flight times vary with wind, payload, temperature level and other
    variables)