Traxxas Anaconda Tirew/All-Star Bk Chrome Elec Rr 1 Left & 1 Righ

This is a set of the Traxxas Rear All Star Wheels
and Anaconda Tires for Electric Vehicles.

FEATURES:
Black chrome plated plastic, 5 spoke design
Split X-Pattern tread tires with foam inserts

CONSISTS OF:
One left and one right all-star wheel with Anaconda tires and
    foam inserts for electric automobiles

REQUIRES:
Setting up on car

SPECS:
Diameter: 3.93" (100mm)
Width: 1.96" (50mm)

Get this thing to improve the one you read around.

Anaconda Tire W/All-Star Bk Chrome Nitro Rr/Elec F R 1 Lef

This is a set of the Traxxas Nitro Rear/Electric Front
All Star Wheels and Anaconda Tires.

FEATURES:
Black chrome plated plastic, 5 spoke design
Split X-Pattern tread tires with foam inserts

CONSISTS OF:
One left and one right all-star wheels with anaconda tires and
    foam inserts for nitro rear/electric front automobiles

REQUIRES:
Setting up on car

SPECS:
Diameter: 3.93" (100mm)
Width: 1.96" (50mm)

The listed below thing also pairs truly well with the thing being gone over.

Fr All-Star Whls+Anaconda Tires (2)

This is a set of the Traxxas Assembled Nitro Front
All Star Wheels and Anaconda Tires.

FEATURES:
Black chrome plated plastic, 5 spoke design
Split X-Pattern tread tires with foam inserts

CONSISTS OF:
One left and one right All-Star wheels with Anaconda tires and
    foam inserts for Nitro Front automobiles

REQUIRES:
Setting up on car

SPECS:
Diameter: 3.93" (100mm)
Width: 1.96" (50mm)

This is a great addition to the thing currently being gone over.

Driveshafts, Front, Steel-Spline Constant Velocity (Complete Ass

This is a set of optional Front Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FEATURES:
Harddened steel building and construction

CONSISTS OF:
Two Front Driveshafts

Often purchased with the thing that you are currently checking out.

Driveshafts, Rear, Steel-Spline Constant-Velocity (Complete Asse

This is a set of optional Rear Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FEATURES:
Harddened steel building and construction

CONSISTS OF:
Two Rear Driveshafts

This thing is frequently purchased with the above stated thing.

Spur Gear (83T) 48P

This is a 48P, 83T Stimulate Gear for models with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
83 tooth
Created for models with a slipper clutch.
Black plastic building and construction

CONSISTS OF:
One spur gear

SPECS:
Pitch: 48
Tooth: 83

COMMENTS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    86T gear (TRAC4686) and 90T gear (TRAC4690).

This thing is frequently purchased with the above stated thing.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Created for models with a slipper clutch.
Black plastic building and construction

CONSISTS OF:
One spur gear

SPECS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

This thing praises the main item right here.

15T Pinion Gear 32P

This is a 15 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is connected straight to the motor.

FEATURES:
Machined Steel
Created for a 3mm shaft

CONSISTS OF:
One 15 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This gear is just one of 2 which are used on the E-Maxx dual motor
    set-up.