Traxxas Aluminum Tuned Pipe/Header Blue

This is an Aluminum Tuned Pipe and Header Assembly.
For any automobile with a side exhaust and sideways mounted .12-.15 size engine.

FEATURES:
Blue anodized aluminum manifold, tuned pipeline and pressure fitting.
Header wraps around the back of the engine, fishing downward at
    30 degrees, and levels off straight. This would point the tuned
    pipeline towards the front of the model.
Allows the engine to have strong power throughout mid & upper RPM range.
Will wrap around many pull starter assemblies.

INCLUDES:
One Header (manifold)
One Tuned Pipe w/ 90 degree pressure fitting set up
One White Silicone Coupler
Two Black Tie Straps (for the coupler)
One piece of blue basic size Fuel Tubing (for fuel tank pressure)
One Exhaust Gasket
Two 3 x 23mm cap head Screws (for installing header to engine)
Two 3mm lock Washers (for installing header to engine)
One 3" Installing Wire (for securing pipeline to the chassis) _
One 4 x 4mm Set Screw (for securing wire to the pipeline)
One 3 x 10mm flat head Screw (for securing pipeline to the chassis)
One 3mm nylon Nut (for securing pipeline to the chassis)

NEEDS:
Putting together onto a .12 to .15 size engine and chassis.
2mm and 2.5mm hex motorist and 5.5mm nut driver.

SPECS:
Pipe Length: 114.6mm
Size: 32.1mm
Header installing holes on center: 27.5mm