Traxxas Alum Bellcrank Posts Threaded

This is a Pair of the Aluminum Bellcrank Posts for the
Traxxas T-Maxx and E-Maxx 4WD Radio Control Beast Trucks.
These bellcrank posts hold the steering bellcranks to the chassis.
The link connects the steering bellcrank to the servo saver.

FEATURES:
Stock aluminum steering bellcranks.
Steering link is steel and rods ends are plastic.

INCLUDES:
Two bellcrank posts
One 3x25mm steering link threaded rod with rod ends

REQUIRES:
Placing bellcranks on posts and connecting posts to chassis.
Attaching steering link to bellcrank and servo saver.

You will love this item if you have the item previously pointed out.

Steering Bellcranks Servo Save

This is the replacement Steering Bellcrank Set for the Traxxas
#3905 E-Maxx.
This will also work as an upgrade for the Nitro Maxx Series and
the #3906 E-Maxx

FUNCTIONS:
Composite nylon building and construction, black in color
Replaces a used or damaged bellcrank set

INCLUDES:
One Left Bellcrank Lower
One Left Bellcrank Upper
One Right Bellcrank
One Draglink
One Spring Cap
One Servo Saver Spring
Two 3x12mm Shoulder Screws (2.5mm hex size)
Six 3x15 Button Head Cap Screws (2mm hex size)
One Black Nylon Spacer
Two White Nylon Spacer

REQUIRES:
Assembly and setup following the design manual (a installation
sheet is consisted of for T-Maxx and #3906 E-Maxx installations)

COMMENTS:
If you are installing this bellcrank on any design other than the
#3905 E-Maxx the following products will also need to be purchased in
order to install this set - TRAC5116, TRAC2579 and TRAC3642