Traxxas Adapter Traxxas ID LiPo Battery

This is the Traxxas iD LiPo Battery Adapter.

FEATURES:
Links Traxxas iD LiPo batteries to LiPo battery chargers with different
    balance ports

CONSISTS OF:
iD LiPo Battery Adapter with 3S Balance Port
Adapter with TWO Balance Port

SPECIFICATIONS:
Length: 5.2" (132mm) suching as adapters

Below is another item that praises the item being gone over.

8400Mah 11.1V 3-Cell 25C Lipo

This is the Traxxas Power Cell 11.1V 8400mAh 25C 3S LiPo Battery.

FEATURES:
Semi rigid building and construction does not need a hard case and removes
    wire harness adapters that can loosen and fail
Engineered specifically to fit Traxxas designs
12AWG multi hair wire is soldered straight to the LiPo cells
    getting rid of increased resistance from bullet adapters and
    unintentional reversed polarity connections

CONSISTS OF:
Traxxas Power Cell 11.1V 8400mAh 25C LiPo 3S Battery with High
    Current Adapter and JST/XH Balance Plug

REQUIRES:
Balancer and LiPo suitable battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235
LiPo charging bag

SPECIFICATIONS:
Setup: 3S2P
Constant Discharge: 25C (210A)
Max Burst Rate: 50C (420A)
Watt Hours: 93.24
Charge Rate: 1C (8.4A)
Max Charge Rate: 2C (16.8A)
Measurements: 6.1 x 1.7 x 1.8" (155 x 44 x 45mm)
Weight: 21.7oz (615g)

COMMENTS:
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER enable to Release listed below 2.5V per cell
NEVER take apart or customize pack electrical wiring in any method or leak cells
NEVER place on flammable materials or leave unattended during
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set battery charger's output volts to match battery volts
ALWAYS shut out of reach of kids

Below is another item that praises the item being gone over.



This is the 2.4GHz Radio Controlled, Brushless Electric Powered,
Ready to Run Traxxas X-Maxx.

Innovative New Features Include;

**Exclusive Self-Righting Action, if automobile rolls upside down**
**just press a button on the transmitter and in most cases**
**the X-Maxx will flip upright onto its wheels.**

**One handed body mount and elimination system**
**removes body posts and pins.**

**Battery Retention System removes body clips or hook and loop straps**

**Shock towers likewise function as carrying manages and level supports**
    **when automobile is placed upside down for upkeep.**

**Additional Technical Information Will Be Included When It Appears.**

FUNCTIONS:
Traxxas Stability Management (TSM): Superior tuning algorithms operate on
    high-speed electronic components to control wheel spin and steering
    instructions on loose dirt, concrete and even ice and snow. TSM can be
    tweaked or switched off by adjusting the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Composite nylon tub, modular design supplies simple access
    to important components, lower front and rear skids and incorporated
    nerf bars for front, rear and side effect protection
Drive Four wheel shaft drive, high-strength steel CV driveshafts with
    splined wheel hexes that get rid of axle pins, aluminum splined
    center driveshaft
Brushless Motor: Velineon 1600, 4 pole 1600Kv, 5mm shaft, aluminum
    heat sink
Motor Mount: Cradle design removes flexing, keyed pins lock gear
    mesh in location
Radio: 2.4GHz TQi transmitter with 5-ch micro TSM telemetry ready
    receiver, BEC voltage and motor temperature level sensing units installed,
    self righting button, built-in fail safe,
    can be geared up with the TQi Docking Base together with the iPhone,
    iPad or iPod touch* to develop a graphical interface for the
    automobile Traxxas Link TQi Wireless Module required (not suched as)
Guiding Servo: High-torque with aluminum heat sink, double shear
    bearing supported servo horn
Electronic Speed Control: Velineon VXL-6s 6S LiPo suitable
Transmission; Single speed
Differentials: Sealed hardened steel bevel, oil filled, restricted slip
Slipper Clutch: Dual fan cooled
Battery Retention System: Integrated into chassis top brace for
    greater rigidity, removes body clips or hook and loop straps,
    adjustable for various batteries
Body: ProGraphix painted and cut
Body Mount System: Quick one-hand body installation and elimination,
    pivoting rear latch system removes body posts and clips
Suspension: Caught high-strength steel pins, double large
    connections, adjustable roll center
Shocks: GTX aluminum bodied, oil-filled, integrated wiper seal keeps
    shafts clean decreasing seal wear
Shock Towers: Composite plastic building and construction, likewise function as carrying
    manages and level supports when automobile is placed upside down
Tires: Aggressive all-terrain tread 8 x 4 x 4"
    foam inserts
Wheels: 4.3x5.7 inches (110x145mm), 17mm hexes
Steering: Bellcrank
Bumpers: Front and rear composite plastic with effect cushions
    behind each bumper to soften blows and contribute to resilience
Ball Bearings: Sealed, complete contact
Radio Box: Waterproof

CONSISTS OF:
RTR X-Maxx Truck with Brushless Motor, Radio, ESC, Painted Body,
    Quick Start Guide and Maintenance Tools

REQUIRES:
Batteries: Two 3S LiPo 5000mAh or greater
Battery Charger: Suitable with chosen LiPo batteries
AA Cells: For for transmitter
LiPo Charging Bag

SPECIFICATIONS:
Automobile;
Length: 29.84" (758mm)
Front Track: 22.26" (540mm)
Rear Track: 20.66" (525mm) distance from external edges of wheels
    determined side-to-side
Ground Clearance: 4" (102mm)
Weight: 19.1lbs (8.66kg)
Ride Height: 13.79" (350mm)
Overall Drive Ratio: 8.24
Wheelbase: 18.92" (480mm)
Shock Length: 7.4" (187mm)
Battery Tray Dimensions: 7.7 x 2 x 1.7" (197mm x 51.5mm x 44mm)
    Body;
Length:
Width:
Height:

COMMENTS:
Readily available in the following colors;
    Blue, TRAD75BB
    Red, TRAD75RR

For Replacement Ball Bearings usage:
    Qty. Size Location Qty. Bearing Set