Traxxas Ac To Dc Adapter

This is the Traxxas Air Conditioner to DC Power Supply Adapter.

FEATURES:
Developed specifically for usage with the Traxxas peak identifying DC
    2-4A quick battery chargers and permits them to be powered from a conventional
    110V Air Conditioner outlet
No on/off switch, plug into switch on and disconnect to turn off, disconnect
    when not in usage

CONSISTS OF:
Traxxas Air Conditioner to DC Power Supply Adapter with 110 Power Cable and 12V
    Output Cable with Socket

SPECIFICATIONS:
Input 100 - 240V Air Conditioner, 50-60Hz, 1.0A
Output: 13.8V, 3.5A

REMARKS:
For dry places and indoor usage only. Do not expose to moisture.
Do closed case, danger of electrical shock.

You will love this product if you have the product earlier stated.



7 cell NiMh 8.4V 5000mah sport battery pack W/Traxxas HC port. Bulge style packs for direct fitment in the Traxxas Stampede, Rustler, Bandit,and Slash. Available in 3300mah and 5000mah, these cells offer much greater average voltage and consistent runtimes charge after charge. Pre-wired with true Traxxas High Current Connectors, and supported by the Racers Edge 1 year service warranty!

Often purchased with the product that you are presently reading about.



This is the electric powered, 2.4GHz TQ radio controlled, 1/10 scale RTR
Slash All Surface Truck from Traxxas with the F-150 Raptor SVT Body,
iD equipped Battery charger and 8.4V iD equipped battery.

**The consisted of TQ 2.4GHz radio system is compatible only with the**
**#6519 receiver and does NOT accept the Docking Base accessory.**

FUNCTIONS:
Chassis: Customized tub, built of nylon with chassis nerf bars
    and freshly designed body installs with reinforced washers to better
    support the body throughout dives and high speed runs
Drive: Rear wheel, with heavy-duty drive yokes and telescopic
    driveshafts for increased suspension travel
Motor: Titan 550 12T brushed
Radio: Traxxas TQ 2.4GHz
Guiding Servo: Digital high-torque, waterproof
Electronic Speed Control: Traxxas XL-5 waterproof, with reverse,
    training mode and one-button setup
Ball Bearings: Complete set, rubber sealed
Battery: Traxxas Power Cell 3000mAh 7-cell 8.4V NiMH w/iD Auto
    Battery Recognition that permits Traxxas iD equipped battery chargers to
    instantly set and enhance charge settings
Battery Battery charger: iD equipped 4A DC powered peak identifying NiMH
Suspension: Adjustable, sturdy steel turnbuckles and captured rod
    ends for high degree of toughness
Shocks: Oil-filled Ultra, fully tunable and rebuildable
Body: ProGraphix trimmed and painted Ford F-150 SVT Raptor
Transmission: Magnum 272 with metal equipments and Revo-spec torque-
    control slipper clutch and sealed gearbox
Differential: Planetary steel equipments
Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when viewed from the side of the car in relation to the
    chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind vehicle
Wheels: Satin-finish 2.2" Slash wheels
Tires: 2.2" (56mm) BF Goodrich Mud Surface
Steering: Bellcrank type with servo saver

CONSISTS OF:
1/10 scale 2wd RTR Slash Truck with painted F-150 Raptor SVT Body,
    2.4GHz Radio, ESC, Brushed Motor, 7-cell Battery, Battery charger, 23 tooth
    Pinion Equipment and User's manual

NEEDS:
AA Batteries: 4 AA cells
Structure and track devices

SPECIFICATIONS:
Vehicle;
Length: 22.36" (568mm)
Height: 8.4" (214mm)
Wheelbase: 13.2" (335mm)
Ground Clearance: 3.5" (89mm)
Track: 11.65" (296mm) range from outer edges of tires side-to-
    side
Weight: 4.76oz (2.16kg)
Internal Equipment Ratio: 2.72 (final drive 12.58)
    Body:
Length: 21.7" (551mm)
Width: 11.9" (302mm)
Height: 5.6" (143mm)

REMARKS:
The Slash F-150 Raptor is available in the following body colors;
    Blue, TRAC85BB Red, TRAC85RR
    Black, TRAC85LL Silver, TRAC85SS

The DuraTrax Element 3900kV Brushless System (DTXC3122) is a perfect,
    inexpensive upgrade for this vehicle.

The ball bearings in the Traxxas Slash 2WD are rubber closed.
Following are the stock numbers for the replacement bearings from
    Traxxas and non-rubber sealed options from Duratrax;
    Qty. Size Area Qty Bearing Set Qty Bearing Set
4 5x11mm Steering Obstructs 2 DTXC1547 2 TRAC5116
4 5x8mm Bellcrank 1 DTXC1523 2 TRAC6728
4 5x11mm R Stub Axles 2 DTXC1547 2 TRAC5116
1 5x11mm Spur Equipment 1 DTXC1547 1 TRAC5116
4 5x11mm Transmission 2 DTXC1547 2 TRAC5116