Traxxas 8400Mah 11.1V 3-Cell 25C Lipo

This is the Traxxas Power Cell 11.1V 8400mAh 25C THREE LiPo Battery.

FEATURES:
Semi stiff construction does not need a difficult case and eliminates
    wire harness connectors that can loosen up and fail
Engineered specifically to fit Traxxas designs
12AWG multi hair wire is soldered directly to the LiPo cells
    eliminating increased resistance from bullet connectors and
    accidental reversed polarity connections

SUCHES AS:
Traxxas Power Cell 11.1V 8400mAh 25C LiPo THREE Battery with High
    Current Port and JST/XH Balance Plug

REQUIRES:
Balancer and LiPo compatible battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235
LiPo charging bag

SPECS:
Setup: 3S2P
Continuous Discharge: 25C (210A)
Max Burst Rate: 50C (420A)
Watt Hours: 93.24
Charge Rate: 1C (8.4A)
Max Charge Rate: 2C (16.8A)
Dimensions: 6.1 x 1.7 x 1.8" (155 x 44 x 45mm)
Weight: 21.7oz (615g)

COMMENTS:
ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER permit to Release listed below 2.5V per cell
NEVER disassemble or customize pack circuitry in any way or puncture cells
NEVER place on flammable products or leave ignored during
    charging
ALWAYS Charge in a fire-resistant location
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of kids

The below product likewise sets actually well with the product being reviewed.

Adapter Traxxas ID LiPo Battery

This is the Traxxas iD LiPo Battery Adapter.

FEATURES:
Links Traxxas iD LiPo batteries to LiPo battery chargers with different
    balance ports

SUCHES AS:
iD LiPo Battery Adapter with THREE Balance Port
Adapter with 2S Balance Port

SPECS:
Length: 5.2" (132mm) including connectors

This product praises the above reviewed product.



This is the 2.4GHz Radio Controlled, Brushless Electric Powered,
Ready to Run Traxxas X-Maxx.

Innovative New Features Include;

**Unique Self-Righting Action, if automobile rolls upside down**
**just press a button on the transmitter and most of the times**
**the X-Maxx will turn upright onto its wheels.**

**One handed body install and elimination system**
**eliminates body posts and pins.**

**Battery Retention System eliminates body clips or hook and loop straps**

**Shock towers likewise function as bring handles and level supports**
    **when automobile is put upside down for upkeep.**

**Added Technical Info Will Be Included When It Appears.**

FEATURES:
Traxxas Stability Management (TSM): Superior tuning algorithms operate on
    high-speed electronic parts to control wheel spin and steering
    direction on loose dirt, concrete as well as ice and snow. TSM can be
    fine tuned or turned off by changing the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Composite nylon tub, modular design provides simple access
    to critical parts, lower front and rear skids and incorporated
    nerf bars for front, rear and side effect protection
Drive Four wheel shaft drive, high-strength steel CV driveshafts with
    splined wheel hexes that eliminate axle pins, aluminum splined
    center driveshaft
Brushless Motor: Velineon 1600, 4 pole 1600Kv, 5mm shaft, aluminum
    heat sink
Motor Mount: Cradle design eliminates flexing, keyed pins lock equipment
    mesh in place
Radio: 2.4GHz TQi transmitter with 5-ch micro TSM telemetry all set
    receiver, BEC voltage and motor temperature sensors installed,
    self righting button, integrated fail safe,
    can be equipped with the TQi Docking Base in addition to the iPhone,
    iPad or iPod touch* to develop a graphical user interface for the
    automobile Traxxas Link TQi Wireless Module required (not included)
Guiding Servo: High-torque with aluminum heat sink, double shear
    bearing supported servo horn
Electronic Speed Control: Velineon VXL-6s 6S LiPo compatible
Transmission; Single speed
Differentials: Sealed hardened steel bevel, oil filled, limited slip
Slipper Clutch: Dual fan cooled
Battery Retention System: Integrated into chassis top brace for
    greater rigidity, eliminates body clips or hook and loop straps,
    adjustable for various batteries
Body: ProGraphix painted and cut
Body Mount System: Quick one-hand body installation and elimination,
    rotating rear lock mechanism eliminates body posts and clips
Suspension: Captured high-strength steel pins, double large
    connections, adjustable roll center
Shocks: GTX aluminum bodied, oil-filled, integrated wiper seal keeps
    shafts clean reducing seal wear
Shock Towers: Composite plastic construction, likewise function as bring
    handles and level supports when automobile is put upside down
Tires: Aggressive all-terrain tread 8 x 4 x 4"
    foam inserts
Wheels: 4.3x5.7 inches (110x145mm), 17mm hexes
Steering: Bellcrank
Bumpers: Front and rear composite plastic with effect cushions
    behind each bumper to soften blows and contribute to sturdiness
Ball Bearings: Sealed, complete contact
Radio Box: Water resistant

SUCHES AS:
RTR X-Maxx Truck with Brushless Motor, Radio, ESC, Painted Body,
    Quick Start Guide and Upkeep Tools

REQUIRES:
Batteries: 2 THREE LiPo 5000mAh or greater
Battery Battery charger: Compatible with selected LiPo batteries
AA Cells: For for transmitter
LiPo Charging Bag

SPECS:
Vehicle;
Length: 29.84" (758mm)
Front Track: 22.26" (540mm)
Rear Track: 20.66" (525mm) distance from outer edges of wheels
    determined side-to-side
Ground Clearance: 4" (102mm)
Weight: 19.1pounds (8.66kg)
Ride Height: 13.79" (350mm)
General Drive Ratio: 8.24
Wheelbase: 18.92" (480mm)
Shock Length: 7.4" (187mm)
Battery Tray Dimensions: 7.7 x 2 x 1.7" (197mm x 51.5mm x 44mm)
    Body;
Length:
Width:
Height:

COMMENTS:
Offered in the following colors;
    Blue, TRAD75BB
    Red, TRAD75RR

For Replacement Ball Bearings use:
    Qty. Size Location Qty. Bearing Set