JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Traxxas 8400Mah 11.1V 3-Cell 25C Lipo (Traxxas 2878X | TRA2878X)

Model: Traxxas 2878X
Dist. #: TRA2878X   SKU: TRA2878X

Be the first to review this product. (Write Review)

Out of stock

Price:  $129.95

LIPO: Unable to ship this item to Alaska or Hawaii

This item will earn you 130 reward point(s).
130 points = $2.60 off your next order. Learn More

Updated on Mar 29, 2024 12:44:02 AM

LiPo 3S 11.1V 8400 25C...
This is the Traxxas Power Cell 11.1V 8400mAh 25C 3S LiPo Battery.

FEATURES:
Semi stiff building and construction does not require a difficult case and removes
    wire harness connectors that can loosen up and fail
Engineered particularly to fit Traxxas models
12AWG multi strand wire is soldered directly to the LiPo cells
    removing increased resistance from bullet connectors and
    unexpected reversed polarity connections

INCLUDES:
Traxxas Power Cell 11.1V 8400mAh 25C LiPo 3S Battery with High
    Existing Adapter and JST/XH Balance Plug

REQUIRES:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235
LiPo charging bag

SPECS:
Configuration: 3S2P
Continuous Discharge: 25C (210A)
Max Burst Rate: 50C (420A)
Watt Hours: 93.24
Charge Rate: 1C (8.4A)
Max Charge Rate: 2C (16.8A)
Measurements: 6.1 x 1.7 x 1.8" (155 x 44 x 45mm)
Weight: 21.7oz (615g)

COMMENTS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER enable to Discharge listed below 2.5V per cell
NEVER disassemble or customize pack circuitry in any method or puncture cells
NEVER put on combustible products or leave unattended during
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set charger's output volts to match battery volts
CONSTANTLY keep out of reach of children

The below thing likewise sets actually well with the thing being talked about.

Adapter Traxxas ID LiPo Battery

This is the Traxxas iD LiPo Battery Adapter.

FEATURES:
Connects Traxxas iD LiPo batteries to LiPo battery chargers with separate
    balance ports

INCLUDES:
iD LiPo Battery Adapter with 3S Balance Port
Adapter with TWO Balance Port

SPECS:
Length: 5.2" (132mm) consisting of connectors

This thing praises the above talked about thing.



This is the 2.4GHz Radio Controlled, Brushless Electric Powered,
Ready to Run Traxxas X-Maxx.

Ingenious New Features Include;

**Exclusive Self-Righting Action, if automobile rolls upside down**
**just press a button on the transmitter and in many cases**
**the X-Maxx will turn upright onto its wheels.**

**One handed body install and elimination system**
**removes body posts and pins.**

**Battery Retention System removes body clips or hook and loop straps**

**Shock towers also function as carrying manages and level supports**
    **when automobile is positioned upside down for upkeep.**

**Added Technical Information Will Be Included When It Becomes Available.**

FEATURES:
Traxxas Stability Management (TSM): Superior tuning algorithms run on
    high-speed electronic components to manage wheel spin and steering
    instructions on loose dirt, concrete and even ice and snow. TSM can be
    great tuned or switched off by changing the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Composite nylon tub, modular design provides easy access
    to critical components, lower front and rear skids and incorporated
    nerf bars for front, rear and side effect security
Drive 4 wheel shaft drive, high-strength steel CV driveshafts with
    splined wheel hexes that eliminate axle pins, aluminum splined
    center driveshaft
Brushless Motor: Velineon 1600, 4 pole 1600Kv, 5mm shaft, aluminum
    heat sink
Motor Mount: Cradle design removes flexing, keyed pins lock equipment
    mesh in location
Radio: 2.4GHz TQi transmitter with 5-ch micro TSM telemetry prepared
    receiver, BEC voltage and motor temperature sensors installed,
    self righting button, integrated fail safe,
    can be geared up with the TQi Docking Base in addition to the iPhone,
    iPad or iPod touch* to develop a graphical user interface for the
    automobile Traxxas Link TQi Wireless Module needed (not included)
Guiding Servo: High-torque with aluminum heat sink, double shear
    bearing supported servo horn
Electronic Speed Control: Velineon VXL-6s 6S LiPo suitable
Transmission; Single speed
Differentials: Sealed solidified steel bevel, oil filled, limited slip
Slipper Clutch: Dual fan cooled
Battery Retention System: Integrated into chassis top brace for
    higher rigidity, removes body clips or hook and loop straps,
    adjustable for various batteries
Body: ProGraphix painted and cut
Body Mount System: Quick one-hand body setup and elimination,
    pivoting rear lock system removes body posts and clips
Suspension: Caught high-strength steel pins, double large
    connections, adjustable roll center
Shocks: GTX aluminum bodied, oil-filled, integrated wiper seal keeps
    shafts clean minimizing seal wear
Shock Towers: Composite plastic building and construction, also function as carrying
    manages and level supports when automobile is positioned upside down
Tires: Aggressive all-terrain tread 8 x 4 x 4"
    foam inserts
Wheels: 4.3x5.7 inches (110x145mm), 17mm hexes
Steering: Bellcrank
Bumpers: Front and rear composite plastic with effect cushions
    behind each bumper to soften blows and contribute to resilience
Ball Bearings: Sealed, full contact
Radio Box: Waterproof

INCLUDES:
RTR X-Maxx Truck with Brushless Motor, Radio, ESC, Painted Body,
    Quick Start Guide and Maintenance Tools

REQUIRES:
Batteries: Two 3S LiPo 5000mAh or higher
Battery Battery charger: Suitable with chosen LiPo batteries
AA Cells: For for transmitter
LiPo Charging Bag

SPECS:
Vehicle;
Length: 29.84" (758mm)
Front Track: 22.26" (540mm)
Rear Track: 20.66" (525mm) range from outer edges of wheels
    measured side-to-side
Ground Clearance: 4" (102mm)
Weight: 19.1lbs (8.66kg)
Ride Height: 13.79" (350mm)
Total Drive Ratio: 8.24
Wheelbase: 18.92" (480mm)
Shock Length: 7.4" (187mm)
Battery Tray Dimensions: 7.7 x 2 x 1.7" (197mm x 51.5mm x 44mm)
    Body;
Length:
Width:
Height:

COMMENTS:
Offered in the following colors;
    Blue, TRAD75BB
    Red, TRAD75RR

For Replacement Ball Bearings use:
    Qty. Size Location Qty. Bearing Set

LIPO: Unable to ship this item to Alaska or Hawaii


Frequently Bought Together

Traxxas 8400Mah 11.1V 3-Cell 25C Lipo
+
Traxxas Adapter Traxxas ID LiPo Battery
+
Traxxas Ez-Peak Plus Plus 100 Watt Nimh/Lipo Dual Charger W/ Id System
This Item: Traxxas 8400Mah 11.1V 3-Cell 25C Lipo
$129.95
Traxxas Adapter Traxxas ID LiPo Battery
$11.99
Traxxas Ez-Peak Plus Plus 100 Watt Nimh/Lipo Dual Charger W/ Id System
$119.95

Total Price: $261.89

Add All Three To Cart
Visual Parts Finder
What's New?
";