JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Traxxas 8400Mah 11.1V 3-Cell 25C Lipo (Traxxas 2878X | TRA2878X)
Due to the impact of the COVID-19/Corona virus, there my be delays in the shipping estimates shown on our site.

We appreciate your understanding and support during these uncertain times.

Model: Traxxas 2878X
Dist. #: TRA2878X   SKU: TRA2878X

Be the first to review this product. (Write Review)

Out of stock

Price:  $129.95

LIPO: Unable to ship this item to Alaska or Hawaii

This item will earn you 130 reward point(s).
130 points = $2.60 off your next order. Learn More

Updated on Nov 30, 2020 05:59:04 PM

LiPo 3S 11.1V 8400 25C...
This is the Traxxas Power Cell 11.1V 8400mAh 25C THREE LiPo Battery.

Semi rigid building and construction does not require a tough case and eliminates
    wire harness ports that can loosen up and fail
Engineered particularly to fit Traxxas models
12AWG multi hair wire is soldered directly to the LiPo cells
    eliminating increased resistance from bullet ports and
    unintentional reversed polarity connections

Traxxas Power Cell 11.1V 8400mAh 25C LiPo THREE Battery with High
    Current Port and JST/XH Balance Plug

Balancer and LiPo compatible charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235
LiPo charging bag

Configuration: 3S2P
Continuous Discharge: 25C (210A)
Max Burst Rate: 50C (420A)
Watt Hours: 93.24
Charge Rate: 1C (8.4A)
Max Charge Rate: 2C (16.8A)
Dimensions: 6.1 x 1.7 x 1.8" (155 x 44 x 45mm)
Weight: 21.7oz (615g)

ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER permit to Release below 2.5V per cell
NEVER take apart or modify pack electrical wiring in any way or leak cells
NEVER place on flammable products or leave ignored throughout
ALWAYS Charge in a fireproof area
ALWAYS set charger's output volts to match battery volts
CONSTANTLY shut out of reach of children

The below product additionally pairs actually well with the product being discussed.

Adapter Traxxas ID LiPo Battery

This is the Traxxas iD LiPo Battery Adapter.

Links Traxxas iD LiPo batteries to LiPo battery chargers with separate
    balance ports

iD LiPo Battery Adapter with THREE Balance Port
Adapter with 2S Balance Port

Length: 5.2" (132mm) consisting of ports

This product praises the above discussed product.

This is the 2.4GHz Radio Controlled, Brushless Electric Powered,
Ready to Run Traxxas X-Maxx.

Ingenious New Features Include;

**Exclusive Self-Righting Action, if automobile rolls upside down**
**simply push a button on the transmitter and in most cases**
**the X-Maxx will flip upright onto its wheels.**

**One handed body mount and removal system**
**eliminates body posts and pins.**

**Battery Retention System eliminates body clips or hook and loop straps**

**Shock towers also act as carrying handles and level supports**
    **when automobile is placed upside down for upkeep.**

**Additional Technical Info Will Be Included When It Appears.**

Traxxas Stability Management (TSM): Superior tuning algorithms work on
    high-speed electronic parts to manage wheel spin and steering
    direction on loose dirt, concrete and even ice and snow. TSM can be
    fine tuned or switched off by changing the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Composite nylon tub, modular design provides easy access
    to important parts, lower front and rear skids and incorporated
    nerf bars for front, rear and side effect defense
Drive Four wheel shaft drive, high-strength steel CV driveshafts with
    splined wheel hexes that eliminate axle pins, aluminum splined
    center driveshaft
Brushless Motor: Velineon 1600, 4 pole 1600Kv, 5mm shaft, aluminum
    heat sink
Motor Mount: Cradle design eliminates flexing, keyed pins lock gear
    mesh in restaurant
Radio: 2.4GHz TQi transmitter with 5-ch micro TSM telemetry all set
    receiver, BEC voltage and motor temperature level sensing units installed,
    self righting button, integrated fail safe,
    can be geared up with the TQi Docking Base along with the iPhone,
    iPad or iPod touch* to develop a graphical user interface for the
    automobile Traxxas Link TQi Wireless Module required (not suched as)
Steering Servo: High-torque with aluminum heat sink, double shear
    bearing supported servo horn
Electronic Speed Control: Velineon VXL-6s 6S LiPo compatible
Transmission; Single speed
Differentials: Sealed solidified steel bevel, oil filled, restricted slip
Slipper Clutch: Dual fan cooled
Battery Retention System: Integrated into chassis top brace for
    higher rigidity, eliminates body clips or hook and loop straps,
    adjustable for various batteries
Body: ProGraphix painted and trimmed
Body Mount System: Quick one-hand body installation and removal,
    pivoting rear latch mechanism eliminates body posts and clips
Suspension: Recorded high-strength steel pins, double large
    connections, adjustable roll center
Shocks: GTX aluminum bodied, oil-filled, integrated wiper seal keeps
    shafts clean minimizing seal wear
Shock Towers: Composite plastic building and construction, also act as carrying
    handles and level supports when automobile is placed upside down
Tires: Aggressive all-terrain tread 8 x 4 x 4"
    foam inserts
Wheels: 4.3x5.7 inches (110x145mm), 17mm hexes
Steering: Bellcrank
Bumpers: Front and rear composite plastic with effect cushions
    behind each bumper to soften blows and contribute to toughness
Ball Bearings: Sealed, complete contact
Radio Box: Waterproof

RTR X-Maxx Truck with Brushless Motor, Radio, ESC, Painted Body,
    Quick Start Guide and Maintenance Tools

Batteries: Two THREE LiPo 5000mAh or higher
Battery Battery charger: Suitable with selected LiPo batteries
AA Cells: For for transmitter
LiPo Charging Bag

Length: 29.84" (758mm)
Front Track: 22.26" (540mm)
Rear Track: 20.66" (525mm) distance from external edges of wheels
    determined side-to-side
Ground Clearance: 4" (102mm)
Weight: 19.1lbs (8.66kg)
Ride Height: 13.79" (350mm)
Overall Drive Ratio: 8.24
Wheelbase: 18.92" (480mm)
Shock Length: 7.4" (187mm)
Battery Tray Dimensions: 7.7 x 2 x 1.7" (197mm x 51.5mm x 44mm)

Offered in the following colors;
    Blue, TRAD75BB
    Red, TRAD75RR

For Replacement Ball Bearings usage:
    Qty. Size Place Qty. Bearing Set

LIPO: Unable to ship this item to Alaska or Hawaii

Frequently Bought Together

Traxxas 8400Mah 11.1V 3-Cell 25C Lipo
Traxxas Adapter Traxxas ID LiPo Battery
Traxxas Ez-Peak Plus Plus 100 Watt Nimh/Lipo Dual Charger W/ Id System
This Item: Traxxas 8400Mah 11.1V 3-Cell 25C Lipo
Traxxas Adapter Traxxas ID LiPo Battery
Traxxas Ez-Peak Plus Plus 100 Watt Nimh/Lipo Dual Charger W/ Id System

Total Price: $241.89

Add All Three To Cart
Visual Parts Finder
What's New?