JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Traxxas 8400Mah 11.1V 3-Cell 25C Lipo (Traxxas 2878X | TRA2878X)
Due to the impact of the COVID-19/Corona virus, there my be delays in the shipping estimates shown on our site.

We appreciate your understanding and support during these uncertain times.

Model: Traxxas 2878X
Dist. #: TRA2878X   SKU: TRA2878X

Be the first to review this product. (Write Review)

Out of stock

Price:  $129.95

LIPO: Unable to ship this item to Alaska or Hawaii

This item will earn you 130 reward point(s).
130 points = $2.60 off your next order. Learn More

Updated on Jul 2, 2022 06:15:15 AM

LiPo 3S 11.1V 8400 25C...
This is the Traxxas Power Cell 11.1V 8400mAh 25C THREE LiPo Battery.

Semi stiff building and construction does not require a hard case and eliminates
    wire harness connectors that can loosen up and fail
Engineered specifically to fit Traxxas models
12AWG multi hair wire is soldered straight to the LiPo cells
    getting rid of increased resistance from bullet connectors and
    accidental reversed polarity connections

Traxxas Power Cell 11.1V 8400mAh 25C LiPo THREE Battery with High
    Existing Port and JST/XH Balance Plug

Balancer and LiPo compatible charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235
LiPo charging bag

Configuration: 3S2P
Continuous Discharge: 25C (210A)
Max Burst Rate: 50C (420A)
Watt Hours: 93.24
Charge Rate: 1C (8.4A)
Max Charge Rate: 2C (16.8A)
Dimensions: 6.1 x 1.7 x 1.8" (155 x 44 x 45mm)
Weight: 21.7oz (615g)

ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER permit to Release listed below 2.5V per cell
NEVER disassemble or customize pack wiring in any way or leak cells
NEVER put on combustible products or leave unattended throughout
ALWAYS Charge in a fire-resistant area
ALWAYS set charger's output volts to match battery volts
CONSTANTLY keep out of reach of children

The listed below item also sets truly well with the item being reviewed.

Adapter Traxxas ID LiPo Battery

This is the Traxxas iD LiPo Battery Adapter.

Connects Traxxas iD LiPo batteries to LiPo battery chargers with separate
    balance ports

iD LiPo Battery Adapter with THREE Balance Port
Adapter with 2S Balance Port

Length: 5.2" (132mm) including connectors

This item compliments the above reviewed item.

This is the 2.4GHz Radio Controlled, Brushless Electric Powered,
Ready to Run Traxxas X-Maxx.

Ingenious New Characteristic Include;

**Exclusive Self-Righting Action, if vehicle rolls upside down**
**simply press a button on the transmitter and most of the times**
**the X-Maxx will turn upright onto its wheels.**

**One handed body install and elimination system**
**eliminates body posts and pins.**

**Battery Retention System eliminates body clips or hook and loop straps**

**Shock towers likewise serve as carrying manages and level supports**
    **when vehicle is put upside down for maintenance.**

**Additional Technical Info Will Be Included When It Appears.**

Traxxas Stability Management (TSM): Superior tuning algorithms operate on
    high-speed electronic components to manage wheel spin and steering
    direction on loose dirt, concrete as well as ice and snow. TSM can be
    great tuned or shut off by changing the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Composite nylon tub, modular design offers easy access
    to crucial components, lower front and rear skids and integrated
    nerf bars for front, rear and side impact protection
Drive 4 wheel shaft drive, high-strength steel CV driveshafts with
    splined wheel hexes that eliminate axle pins, aluminum splined
    center driveshaft
Brushless Motor: Velineon 1600, 4 pole 1600Kv, 5mm shaft, aluminum
    heat sink
Motor Mount: Cradle design eliminates flexing, keyed pins lock equipment
    mesh in location
Radio: 2.4GHz TQi transmitter with 5-ch micro TSM telemetry all set
    receiver, BEC voltage and motor temperature sensing units set up,
    self righting button, integrated fail safe,
    can be geared up with the TQi Docking Base in addition to the iPhone,
    iPad or iPod touch* to develop a visual user interface for the
    vehicle Traxxas Link TQi Wireless Module required (not consisted of)
Guiding Servo: High-torque with aluminum heat sink, double shear
    bearing supported servo horn
Electronic Speed Control: Velineon VXL-6s 6S LiPo compatible
Transmission; Single speed
Differentials: Sealed hardened steel bevel, oil filled, limited slip
Slipper Clutch: Double fan cooled
Battery Retention System: Integrated into chassis leading brace for
    higher rigidity, eliminates body clips or hook and loop straps,
    adjustable for different batteries
Body: ProGraphix painted and cut
Body Mount System: Quick one-hand body installation and elimination,
    pivoting rear lock system eliminates body posts and clips
Suspension: Recorded high-strength steel pins, double large
    connections, adjustable roll center
Shocks: GTX aluminum bodied, oil-filled, integrated wiper seal keeps
    shafts clean reducing seal wear
Shock Towers: Composite plastic building and construction, likewise serve as carrying
    manages and level supports when vehicle is put upside down
Tires: Aggressive all-terrain tread 8 x 4 x 4"
    foam inserts
Wheels: 4.3x5.7 inches (110x145mm), 17mm hexes
Steering: Bellcrank
Bumpers: Front and rear composite plastic with impact cushions
    behind each bumper to soften blows and contribute to sturdiness
Ball Bearings: Sealed, complete contact
Radio Box: Waterproof

RTR X-Maxx Truck with Brushless Motor, Radio, ESC, Painted Body,
    Quick Start Guide and Upkeep Tools

Batteries: 2 THREE LiPo 5000mAh or higher
Battery Battery charger: Suitable with selected LiPo batteries
AA Cells: For for transmitter
LiPo Charging Bag

Length: 29.84" (758mm)
Front Track: 22.26" (540mm)
Rear Track: 20.66" (525mm) distance from outer edges of wheels
    determined side-to-side
Ground Clearance: 4" (102mm)
Weight: 19.1pounds (8.66kg)
Ride Height: 13.79" (350mm)
Total Drive Ratio: 8.24
Wheelbase: 18.92" (480mm)
Shock Length: 7.4" (187mm)
Battery Tray Dimensions: 7.7 x 2 x 1.7" (197mm x 51.5mm x 44mm)

Readily available in the following colors;
    Blue, TRAD75BB
    Red, TRAD75RR

For Replacement Ball Bearings usage:
    Qty. Size Area Qty. Bearing Set

LIPO: Unable to ship this item to Alaska or Hawaii

Frequently Bought Together

Traxxas 8400Mah 11.1V 3-Cell 25C Lipo
Traxxas Adapter Traxxas ID LiPo Battery
Traxxas Ez-Peak Plus Plus 100 Watt Nimh/Lipo Dual Charger W/ Id System
This Item: Traxxas 8400Mah 11.1V 3-Cell 25C Lipo
Traxxas Adapter Traxxas ID LiPo Battery
Traxxas Ez-Peak Plus Plus 100 Watt Nimh/Lipo Dual Charger W/ Id System

Total Price: $261.89

Add All Three To Cart
Visual Parts Finder
What's New?