Traxxas 70T Spur Gear 32P

This is the spur gear (or primary gear) for the Traxxas Nitro Rustler trucks.

Includes: One 70 tooth gear

Features: Tough nylon building
Drilled for lightweight

Specifications: Teeth-70
Pitch-32

Requires: Absolutely nothing, this is a direct replacement part.

Comments: This is the very same gear that can be found in the truck package.

2/10/97
AST

Get this thing to enhance the one you read around.

Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all the TRAXXAS kits that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...

FUNCTIONS:
Made of RULON

INCLUDES:
Twelve pegs ***Colors may differ from image***

SPECS:
length - 3.5mm
diameter - 3mm

COMMENTS:
These pegs go in the holes on the side of the spur gear.

Below is an additional thing that praises the thing being talked about.

Slipper Pressure Rings (2)

These are the replacement slipper and differential rings for the Traxxas kits
that have slipper clutches and ball diffs (Rad 2, Hawk 2, TRX-1 and Blue
Eagles). They are metal rings with a notch in them and are set up on either
side the differential gear or the spur gear.

PACKAGE
INCLUDES: 2 notched rings

Want an additional terrific thing to match the above discussed thing?

72T Spur Gear 32P

This is the Replacement 72 Spur Gear for the
Traxxas Nitro Rustler and Nitro T-Maxx Trucks.

FEATURES:
Black plastic, slipper clutch design stimulate gear.

INCLUDES:
One 72 tooth spur gear

REQUIRES:
The other parts of that comprise the slipper clutch are:
    #1994 - tension spring TRAC7994
    #4625 - pressure plate TRAC9625
    #4622 - pressure rings TRAC9622
    #4685 - friction pegs TRAC9685
    #4185 - top gear shaft to slipper adapter TRAC4185

SPECS:
Tooth: 72
Pitch: 32

Many others have acquired this thing together with the thing that you are currently reading about.

Glow Plug S-Dty Long/Med

This is the Traxxas Super Duty Long Glowplug.

FEATURES:
Perfect for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Fit for the different throttle range of off-road racing
Medium heat range

INCLUDES:
One Traxxas Medium Heat Variety Super Duty Long Glowplug with gasket

REQUIRES:
Plug wrench (HCAP2550) for setting up in cylinder head
Glow Fuel with 10%-20% nitro material

The below thing also pairs truly well with the thing being talked about.

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FUNCTIONS:
Fits all variations of the T-Maxx and E-Maxx
Nylon blend building, black in color
Locknuts used at the chassis and skid plate mounting holes to
    safely lock bulkheads in place, decreasing the possibility of damage

INCLUDES:
One each Left and Right Front Bulkhead
Eight M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws