Traxxas 70T Spur Gear 32P

This is the spur gear (or primary gear) for the Traxxas Nitro Rustler trucks.

Includes: One 70 tooth gear

Functions: Tough nylon building
Drilled for lightweight

Specs: Teeth-70
Pitch-32

Requires: Nothing, this is a direct replacement part.

Comments: This is the same gear that comes in the truck set.

2/10/97
AST

Get this product to improve the one you read around.

Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all the TRAXXAS sets that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, and so on...

FEATURES:
Made from RULON

CONSISTS OF:
Twelve pegs ***Colors may differ from photo***

SPECIFICATIONS:
length - 3.5mm
size - 3mm

REMARKS:
These pegs go in the holes on the side of the spur gear.

Right here is an additional product that compliments the product being discussed.

Slipper Pressure Rings (2)

These are the replacement slipper and differential rings for the Traxxas sets
that have slipper clutches and ball diffs (Rad 2, Hawk 2, TRX-1 and Blue
Eagles). They are metal rings with a notch in them and are set up on either
side the differential gear or the spur gear.

PACKAGE
CONSISTS OF: Two notched rings

Want an additional excellent product to enhance the above mentioned product?

72T Spur Gear 32P

This is the Replacement 72 Spur Gear for the
Traxxas Nitro Rustler and Nitro T-Maxx Trucks.

FEATURES:
Black plastic, slipper clutch design spur gear.

INCLUDES:
One 72 tooth spur gear

NEEDS:
The other parts of that make up the slipper clutch are:
    #1994 - stress spring TRAC7994
    #4625 - pressure plate TRAC9625
    #4622 - pressure rings TRAC9622
    #4685 - friction pegs TRAC9685
    #4185 - leading gear shaft to slipper adapter TRAC4185

SPECIFICATIONS:
Tooth: 72
Pitch: 32

Numerous others have actually purchased this product along with the product that you are presently reviewing.

Glow Plug S-Dty Long/Med

This is the Traxxas Super Responsibility Long Glowplug.

FEATURES:
Perfect for all Traxxas engines including the 2.5, 2.5R and 3.3 engines
Matched for the varied throttle variety of off-road racing
Medium heat variety

CONSISTS OF:
One Traxxas Medium Heat Range Super Responsibility Long Glowplug with gasket

NEEDS:
Plug wrench (HCAP2550) for setting up in cylinder head
Glow Fuel with 10%-20% nitro material

The listed below product additionally pairs truly well with the product being discussed.

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FEATURES:
Fits all variations of the T-Maxx and E-Maxx
Nylon blend building, black in color
Locknuts used at the chassis and skid plate mounting holes to
    securely lock bulkheads in place, minimizing the opportunity of breakage

CONSISTS OF:
One each Left and Right Front Bulkhead
Eight M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws