Traxxas 70T Spur Gear 32P

This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks.

Includes: One 70 tooth gear

Features: Difficult nylon building
Drilled for lightweight

Specs: Teeth-70
Pitch-32

Needs: Nothing, this is a direct replacement part.

Comments: This is the same gear that is available in the truck kit.

2/10/97
AST

Get this product to improve the one you are reading about.

Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all the TRAXXAS sets that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...

FUNCTIONS:
Made of RULON

INCLUDES:
Twelve pegs ***Colors may differ from photo***

SPECS:
length - 3.5mm
size - 3mm

REMARKS:
These pegs enter the holes on the side of the spur gear.

Here is an additional product that compliments the product being talked about.

Slipper Pressure Rings (2)

These are the replacement slipper and differential rings for the Traxxas sets
that have slipper clutches and ball diffs (Rad 2, Hawk 2, TRX-1 and Blue
Eagles). They are metal rings with a notch in them and are installed on either
side the differential gear or the spur gear.

PACKAGE
INCLUDES: Two notched rings

Want an additional terrific product to enhance the above mentioned product?

72T Spur Gear 32P

This is the Replacement 72 Spur Gear for the
Traxxas Nitro Rustler and Nitro T-Maxx Trucks.

FEATURES:
Black plastic, slipper clutch style spur gear.

INCLUDES:
One 72 tooth spur gear

REQUIRES:
The other parts of that make up the slipper clutch are:
    #1994 - stress spring TRAC7994
    #4625 - pressure plate TRAC9625
    #4622 - pressure rings TRAC9622
    #4685 - friction pegs TRAC9685
    #4185 - leading gear shaft to slipper adapter TRAC4185

SPECS:
Tooth: 72
Pitch: 32

Lots of others have actually acquired this product together with the product that you are currently reading about.

Glow Plug S-Dty Long/Med

This is the Traxxas Super Task Long Glowplug.

FEATURES:
Perfect for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Suited for the diverse throttle variety of off-road racing
Medium heat variety

INCLUDES:
One Traxxas Medium Heat Range Super Task Long Glowplug with gasket

REQUIRES:
Plug wrench (HCAP2550) for setting up in cylinder head
Glow Fuel with 10%-20% nitro material

The below product also pairs really well with the product being talked about.

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FUNCTIONS:
Fits all versions of the T-Maxx and E-Maxx
Nylon blend building, black in color
Locknuts used at the chassis and skid plate installing holes to
    securely lock bulkheads in place, minimizing the opportunity of damage

INCLUDES:
One each Left and Right Front Bulkhead
Eight M3 Locknuts
Four M3 x 20mm Flathead Screws
Four M3 x 22mm Flathead Screws