Traxxas 59Mm Turnbuckles Toe Link (2) (Assembled W/ Rod En Ds And Ho

These are the Traxxas 59mm Turnbuckle Toe Hyperlinks
for the Traxxas Rustler, Stampede and Bandit VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
Two 59mm (78mm center to center) turnbuckles

NEEDS:
Installation on the car

Many others have gotten this product together with the product that you are currently reading about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Below is a fantastic product that many others have purchased the very same time.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Hyperlinks
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
Two front 39mm (69mm center to center) turnbuckles and guideline
    sheet

NEEDS:
Installation on the car

Want an additional fantastic product to enhance the above discussed product?

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECS:
Size: 5x8mm
Density: 0.5mm

Below is an additional product that compliments the product being reviewed.

3 X 12Mm Button Head Hex Screw

These are 3x12mm Button Head Screws from Traxxas

FUNCTIONS:
Steel Building and construction
Black in color
Hex head

CONSISTS OF:
6 button head screws

SPECS:
Length: 12mm (.47")
Size: 3mm (.12")

REMARKS:
These can be use with different application.

Want an additional fantastic product to enhance the above discussed product?

Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Hyperlinks
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
Two 61mm (96mm center to center) turnbuckles

NEEDS:
Installation on the car

You will certainly enjoy this product if you have the product just above mentioned.

3.0Mm X 15 Socket Head Cap Screws (4/Pkg)

These are 3x15mm Socket Head Cap Screws.

FEATURES:
Steel building

CONSISTS OF:
Four screws

NEEDS:
2.5mm allen wrench

SPECS:
Length: 15mm
Size: 3mm

Want an additional fantastic product to enhance the above discussed product?

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building, black in color
Direct fit hop-up needs no model adjustment for installation

CONSISTS OF:
Two Front A-Arms

NEEDS:
Installation following the model handbook

SPECS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at widest

REMARKS:
For the blue variation of this part order RPMC8246

Get this product to improve the one you are reading about.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs mount to the front A-arms and is what the
steering knuckles connect to.

FEATURES:
Nylon building, black in color
Stamped right and delegated insure proper installation

CONSISTS OF:
Two RPM 30° Front Caster Blocks

NEEDS:
Assembly between A-arms and steering knuckles

This product compliments the above reviewed product.

RC Screwz Traxxas Slash Stainless Steel Screw Kit

This is an optional RC Screwz Screw Set for the 2WD Traxxas Slash.

FEATURES:
Stainless steel screws replace all stock screws, locknuts and
    washers

CONSISTS OF:
One Case including all replacement screws for the Traxxas Slash