Traxxas 59Mm Turnbuckles Toe Link (2) (Assembled W/ Rod En Ds And Ho

These are the Traxxas 59mm Turnbuckle Toe Links
for the Traxxas Rustler, Stampede and Outlaw VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
Two 59mm (78mm center to center) turnbuckles

NEEDS:
Setup on the automobile

Several others have gotten this thing together with the thing that you are presently checking out.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

Here is a terrific thing that many others have purchased the very same time.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
Two front 39mm (69mm center to center) turnbuckles and instruction
    sheet

NEEDS:
Setup on the automobile

Want another terrific thing to enhance the above discussed thing?

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECIFICATIONS:
Size: 5x8mm
Density: 0.5mm

Here is another thing that praises the thing being gone over.

3 X 12Mm Button Head Hex Screw

These are 3x12mm Button Head Screws from Traxxas

FEATURES:
Steel Construction
Black in color
Hex head

CONSISTS OF:
Six button head screws

SPECIFICATIONS:
Length: 12mm (.47")
Diameter: 3mm (.12")

COMMENTS:
These can be use with numerous application.

Want another terrific thing to enhance the above discussed thing?

Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Links
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
Two 61mm (96mm center to center) turnbuckles

NEEDS:
Setup on the automobile

You will certainly like this item if you have the item previously stated.

3.0Mm X 15 Socket Head Cap Screws (4/Pkg)

These are 3x15mm Socket Head Cap Screws.

FEATURES:
Steel building

CONSISTS OF:
Four screws

NEEDS:
2.5mm allen wrench

SPECIFICATIONS:
Length: 15mm
Diameter: 3mm

Want another terrific thing to enhance the above discussed thing?

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building, black in color
Direct fit hop-up needs no model modification for installation

CONSISTS OF:
Two Front A-Arms

NEEDS:
Setup following the model handbook

SPECIFICATIONS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at best

COMMENTS:
For the blue version of this part order RPMC8246

Get this thing to boost the one you are reading around.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks install to the front A-arms and is exactly what the
guiding knuckles connect to.

FEATURES:
Nylon building, black in color
Stamped right and delegated guarantee right installation

CONSISTS OF:
Two RPM 30° Front Caster Blocks

NEEDS:
Assembly between A-arms and guiding knuckles

This thing praises the above gone over thing.

RC Screwz Traxxas Slash Stainless Steel Screw Kit

This is an optional RC Screwz Screw Set for the 2WD Traxxas Slash.

FEATURES:
Stainless steel screws change all stock screws, locknuts and
    washers

CONSISTS OF:
One Case containing all replacement screws for the Traxxas Slash