Traxxas 59Mm Turnbuckles Toe Link (2) (Assembled W/ Rod En Ds And Ho

These are the Traxxas 59mm Turnbuckle Toe Links
for the Traxxas Rustler, Stampede and Outlaw VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
2 59mm (78mm center to center) turnbuckles

NEEDS:
Installation on the vehicle

Many others have actually bought this item together with the item that you are presently checking out.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

Here is a wonderful item that several others have actually purchased the very same time.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
2 front 39mm (69mm center to center) turnbuckles and instruction
    sheet

NEEDS:
Installation on the vehicle

Want one more wonderful item to compliment the above stated item?

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECIFICATIONS:
Size: 5x8mm
Thickness: 0.5mm

Here is one more item that compliments the item being gone over.

3 X 12Mm Button Head Hex Screw

These are 3x12mm Button Head Screws from Traxxas

FEATURES:
Steel Building and construction
Black in color
Hex head

CONSISTS OF:
6 button head screws

SPECIFICATIONS:
Length: 12mm (.47")
Size: 3mm (.12")

REMARKS:
These can be use with different application.

Want one more wonderful item to compliment the above stated item?

Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Links
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
2 61mm (96mm center to center) turnbuckles

NEEDS:
Installation on the vehicle

You will like this product if you have the product above pointed out.

3.0Mm X 15 Socket Head Cap Screws (4/Pkg)

These are 3x15mm Socket Head Cap Screws.

FEATURES:
Steel building

CONSISTS OF:
4 screws

NEEDS:
2.5mm allen wrench

SPECIFICATIONS:
Length: 15mm
Size: 3mm

Want one more wonderful item to compliment the above stated item?

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building, black in color
Direct fit hop-up requires no design modification for installation

CONSISTS OF:
2 Front A-Arms

NEEDS:
Installation following the design handbook

SPECIFICATIONS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at best

REMARKS:
For the blue version of this part order RPMC8246

Get this item to enhance the one you are reading around.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks install to the front A-arms and is what the
guiding knuckles attach to.

FEATURES:
Nylon building, black in color
Stamped right and delegated insure correct installation

CONSISTS OF:
2 RPM 30° Front Caster Blocks

NEEDS:
Assembly between A-arms and guiding knuckles

This item compliments the above gone over item.

RC Screwz Traxxas Slash Stainless Steel Screw Kit

This is an optional RC Screwz Screw Set for the 2WD Traxxas Slash.

FEATURES:
Stainless-steel screws replace all stock screws, locknuts and
    washers

CONSISTS OF:
One Case including all replacement screws for the Traxxas Slash