Traxxas 58T 0.8 P Spur Gear

This is the 58 Tooth Spur Gear
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon construction
Black in color
.8 Module pitch

CONSISTS OF:
One 58T 0.8 Pitch Spur Gear

REQUIRES:
Assembly onto vehicle

The below item additionally pairs really well with the item being talked about.

Rebuild Kit Hd Slipper Clutch

This is the Heavy Task Slipper Clutch Rebuild Package from Traxxas.

FEATURES:
Components for both nitro and electric Revo and Maxx trucks

CONSISTS OF:
Three Pads, steel Slipper Disc, two Locknuts, 2x9.8mm Pin, two
    Locknuts, Spring, two Spring Washers and Recommendations

REQUIRES:
Disassembly of slipper clutch

Below is an additional item that praises the item being talked about.

56T 0.8 P Spur Gear

This is the 56 Tooth Spur Gear
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon construction
Black in color
.8 metric pitch

CONSISTS OF:
One 56T 0.8 Pitch Spur Gear

REQUIRES:
Assembly onto vehicle

Below is a great item that numerous others have actually purchased the exact same time.

12T Pinion Gear 32P

This is a 12 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is attached directly to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

CONSISTS OF:
One 12 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This gear is just one of two which are utilized on the E-Maxx double motor
    set-up.

Below is an additional item that praises the item being talked about.

3Mm Nylon Insert Lock Nuts Metric

These are 3mm Nylon Insert Lock Nuts from Du-Bro's Automobile Line (Metric).

FEATURES:
Zinc plated metal construction.
Clear nylon insert.
Aircraft quality lock nuts.

INCLUDES:
(4) Lock Nuts

SPECS:
Size: 3mm

The below item additionally pairs really well with the item being talked about.



This is the DuraTrax NiMH 8.4V 5000mAh Onyx Stick Battery Load
with Traxxas Connector.

FEATURES:
Suitable sport pack for cars, trucks and boats

CONSISTS OF:
DuraTrax NiMH 8.4V 5000mAh Onyx Stick Battery with Traxxas
    Connector

REQUIRES:
NiMH compatible battery charger such as the Duratrax Onyx series
Female Connector to Molex Male Connector Adapter, TRAC3061 (if utilizing
    Onyx battery charger)

SPECS:
Capability: 5000mAh
Number of Cells in Series: 7
Rated Voltage: 8.4V
Min. Release Voltage: 6.3V
Optimum Recommended Charge Current: 5 amps
Release Lead: 14AWG 2.7" (70mm) long wire w/Traxxas port
Load Dimensions: 6.1 x 1.8 x 0.90" (155 x 45 x 23mm)
Weight: 16 oz (455 g)
Variety of Welds per Connection: 6 spot welds
Cell Size: Sub-C

Want an additional great item to match the above pointed out item?

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.
These are part of the slipper assembly.

FEATURES:
Aluminum construction

CONSISTS OF:
One slipper pressure plate
One slipper hub

REQUIRES:
Setup onto vehicle.

This item praises the above talked about item.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building
Protected with blue rubber seals

CONSISTS OF:
2 Ball Bearings

REQUIRES:
Assembly to vehicle

SPECS:
Inner Size: 10mm
External Size: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are utilized to support the Primary Clutch (one required).