Traxxas 58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Hyperlinks
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Put together w/Rod Ends
Can be Utilized on Front or Rear

CONSISTS OF:
2 58mm Threaded Rods
4 3mm Ball Ends
4 3mm Hollow Balls

NEEDS:
Assembly onto Car

Want an additional great product to enhance the above pointed out product?

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Hyperlinks
for the Bandit, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
2 rear 49mm (82mm center to center) turnbuckles

NEEDS:
Installation on the vehicle

The below product likewise pairs truly well with the product being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

This product praises the above discussed product.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Hyperlinks
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
2 front 39mm (69mm center to center) turnbuckles and guideline
    sheet

NEEDS:
Installation on the vehicle

Lots of others have purchased this product along with the product that you are presently reading about.

61Mm Turnbuckles (Front Tie Rods) (2) (Includes In Stalled

These are the 61mm Front Turnbuckles
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Building and construction
Black and Silver in Color
Put together w/Rod Ends

CONSISTS OF:
2 61mm Front Tie Rods
4 Rod Ends
4 Hollow Balls

NEEDS:
Assembly onto Car

You will like this item if you have the item earlier stated.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Installation on vehicle

Right here is an additional product that praises the product being discussed.

Steering Drag Link 3905

    This is the Steering Drag Link for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building, black and silver in color

CONSISTS OF:
One steering drag link (4x72mm turnbuckle, rod ends and hollow balls)

NEEDS:
Installation on the vehicle

SPECIFICATIONS:
Length: 3.93" (100mm)
Shaft diamter: .15" (4mm)

You will like this item if you have the item earlier stated.

Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Hyperlinks
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
2 61mm (96mm center to center) turnbuckles

NEEDS:
Installation on the vehicle

This product praises the above discussed product.

Front Suspension Arms Left & Right Jato

These are the Front Left and Right Suspension Arms
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Left Front Suspension Arm
One Right Front Suspension Arm

NEEDS:
Assembly onto Car

Lots of others have purchased this product along with the product that you are presently reading about.



This is an optional Pro-Line ProTrac Suspension Kit Front Arms
for use on the 1/10 scale 2WD Traxxas Slash.
**Will not work with the 4x4 Slash.**

FEAUTRES:
Nylon building, black in color
Boosts forward velocity, corner speed, consistency and
    drivability

CONSISTS OF:
2 front arms
One Proline decal

NEEDS:
Installation onto vehicle