Traxxas 58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Links
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Assembled w/Rod Ends
Can be Used on Front or Back

INCLUDES:
Two 58mm Threaded Rods
4 3mm Ball Ends
4 3mm Hollow Balls

NEEDS:
Assembly onto Vehicle

Want one more great item to match the above mentioned item?

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Links
for the Outlaw, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
Two rear 49mm (82mm center to center) turnbuckles

NEEDS:
Setup on the car

The below item also sets truly well with the item being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This item compliments the above discussed item.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
Two front 39mm (69mm center to center) turnbuckles and direction
    sheet

NEEDS:
Setup on the car

Many others have purchased this item along with the item that you are presently reviewing.

61Mm Turnbuckles (Front Tie Rods) (2) (Includes In Stalled

These are the 61mm Front Turnbuckles
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Metal and Nylon Building
Black and Silver in Color
Assembled w/Rod Ends

INCLUDES:
Two 61mm Front Tie Rods
4 Rod Ends
4 Hollow Balls

NEEDS:
Assembly onto Vehicle

You will enjoy this thing if you have the thing previously pointed out.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel construction

INCLUDES:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on car

Below is one more item that compliments the item being discussed.

Steering Drag Link 3905

    This is the Steering Drag Link for the Traxxas E-Maxx.

FEATURES:
Nylon construction, black and silver in color

INCLUDES:
One steering drag link (4x72mm turnbuckle, rod ends and hollow balls)

NEEDS:
Setup on the car

SPECS:
Length: 3.93" (100mm)
Shaft diamter: .15" (4mm)

You will enjoy this thing if you have the thing previously pointed out.

Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Links
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
Two 61mm (96mm center to center) turnbuckles

NEEDS:
Setup on the car

This item compliments the above discussed item.

Front Suspension Arms Left & Right Jato

These are the Front Left and Right Suspension Arms
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Left Front Suspension Arm
One Right Front Suspension Arm

NEEDS:
Assembly onto Vehicle

Many others have purchased this item along with the item that you are presently reviewing.

ProTrac Susp Kit Fr Arms Slash

This is an optional Pro-Line ProTrac Suspension Package Front Arms
for use on the 1/10 scale 2WD Traxxas Slash.
**Will not work with the 4x4 Slash.**

FEAUTRES:
Nylon construction, black in color
Boosts forward acceleration, corner speed, consistency and
    drivability

INCLUDES:
Two front arms
One Proline decal

NEEDS:
Setup onto car