Traxxas 58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Hyperlinks
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends
Can be Utilized on Front or Back

INCLUDES:
2 58mm Threaded Rods
Four 3mm Ball Ends
Four 3mm Hollow Balls

REQUIRES:
Assembly onto Car

Want another wonderful product to match the above discussed product?

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Hyperlinks
for the Bandit, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
2 rear 49mm (82mm center to center) turnbuckles

REQUIRES:
Installation on the automobile

The below product likewise pairs actually well with the product being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This product compliments the above discussed product.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Hyperlinks
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
2 front 39mm (69mm center to center) turnbuckles and guideline
    sheet

REQUIRES:
Installation on the automobile

Lots of others have actually purchased this product along with the product that you are currently reading about.

61Mm Turnbuckles (Front Tie Rods) (2) (Includes In Stalled

These are the 61mm Front Turnbuckles
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Building and construction
Black and Silver in Color
Assembled w/Rod Ends

INCLUDES:
2 61mm Front Tie Rods
Four Rod Ends
Four Hollow Balls

REQUIRES:
Assembly onto Car

You will certainly enjoy this product if you have the product above pointed out.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

INCLUDES:
Rear driveshaft assembly
Screw pin

REQUIRES:
Installation on automobile

Right here is another product that compliments the product being discussed.

Steering Drag Link 3905

    This is the Steering Drag Link for the Traxxas E-Maxx.

FEATURES:
Nylon building, black and silver in color

INCLUDES:
One steering drag link (4x72mm turnbuckle, rod ends and hollow balls)

REQUIRES:
Installation on the automobile

SPECS:
Length: 3.93" (100mm)
Shaft diamter: .15" (4mm)

You will certainly enjoy this product if you have the product above pointed out.

Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Hyperlinks
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
2 61mm (96mm center to center) turnbuckles

REQUIRES:
Installation on the automobile

This product compliments the above discussed product.

Front Suspension Arms Left & Right Jato

These are the Front Left and Right Suspension Arms
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building
Black in color

INCLUDES:
One Left Front Suspension Arm
One Right Front Suspension Arm

REQUIRES:
Assembly onto Car

Lots of others have actually purchased this product along with the product that you are currently reading about.

ProTrac Susp Kit Fr Arms Slash

This is an optional Pro-Line ProTrac Suspension Package Front Arms
for usage on the 1/10 scale 2WD Traxxas Slash.
**Will not work with the 4x4 Slash.**

FEAUTRES:
Nylon building, black in color
Increases forward velocity, corner speed, consistency and
    drivability

INCLUDES:
2 front arms
One Proline decal

REQUIRES:
Installation onto automobile