Traxxas 58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Hyperlinks
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends
Can be Utilized on Front or Rear

CONSISTS OF:
Two 58mm Threaded Rods
Four 3mm Ball Ends
Four 3mm Hollow Balls

NEEDS:
Assembly onto Vehicle

Want an additional fantastic thing to compliment the above stated thing?

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Hyperlinks
for the Outlaw, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
Two rear 49mm (82mm center to center) turnbuckles

NEEDS:
Installation on the automobile

The below thing additionally sets really well with the thing being reviewed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This thing compliments the above reviewed thing.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Hyperlinks
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
Two front 39mm (69mm center to center) turnbuckles and instruction
    sheet

NEEDS:
Installation on the automobile

Lots of others have actually purchased this thing along with the thing that you are presently reviewing.

61Mm Turnbuckles (Front Tie Rods) (2) (Includes In Stalled

These are the 61mm Front Turnbuckles
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Metal and Nylon Building and construction
Black and Silver in Color
Assembled w/Rod Ends

CONSISTS OF:
Two 61mm Front Tie Rods
Four Rod Ends
Four Hollow Balls

NEEDS:
Assembly onto Vehicle

You will love this product if you have the product just above stated.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Installation on automobile

Below is an additional thing that compliments the thing being reviewed.

Steering Drag Link 3905

    This is the Steering Drag Link for the Traxxas E-Maxx.

FUNCTIONS:
Nylon construction, black and silver in color

CONSISTS OF:
One steering drag link (4x72mm turnbuckle, rod ends and hollow balls)

NEEDS:
Installation on the automobile

SPECS:
Length: 3.93" (100mm)
Shaft diamter: .15" (4mm)

You will love this product if you have the product just above stated.

Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Hyperlinks
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
Two 61mm (96mm center to center) turnbuckles

NEEDS:
Installation on the automobile

This thing compliments the above reviewed thing.

Front Suspension Arms Left & Right Jato

These are the Front Left and Right Suspension Arms
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One Left Front Suspension Arm
One Right Front Suspension Arm

NEEDS:
Assembly onto Vehicle

Lots of others have actually purchased this thing along with the thing that you are presently reviewing.

ProTrac Susp Kit Fr Arms Slash

This is an optional Pro-Line ProTrac Suspension Package Front Arms
for use on the 1/10 scale 2WD Traxxas Slash.
**Will not work with the 4x4 Slash.**

FEAUTRES:
Nylon construction, black in color
Increases forward velocity, corner speed, consistency and
    drivability

CONSISTS OF:
Two front arms
One Proline decal

NEEDS:
Installation onto automobile