Traxxas 5800Mah 7.4V 2-Cell 25C Lipo

This is the Traxxas Power Cell iD 7.4V 5800mAh 25C 2S LiPo Battery.

FEATURES:
Semi rigid building and construction does not require a hard case and eliminates
    wire harness connectors that can loosen and fail
Engineered particularly to fit Traxxas models
New high current port with gold-plated copper terminals and
    incorporated balance port
iD Auto Battery Recognition enables Traxxas iD geared up battery chargers to
    immediately set and enhance charge settings
MAXX cable television high-efficiency 12 gauge silicone jacketed wire

INCLUDES:
Traxxas Power Cell 7.4V 5800mAh 25C LiPo 2S Battery with High
    Existing Connector

NEEDS:
LiPo compatible battery charger such as the Traxxas EZ-Peak Plus, TRAP2970
LiPo charging bag

SPECIFICATIONS:
Setup: 2S2P
Constant Discharge: 25C (145A)
Max Burst Rate: 50C (290A)
Watt Hours: 42.92
Charge Rate: 1C (5.8A)
Max Charge Rate: 2C (11.6A)
Measurements: 5.3 x 0.98 x 1.8" (135 x 25 x 45mm)
Weight: 10.2oz (290g)

REMARKS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents higher than 1C
NEVER Trickle Charge
NEVER enable to Release below 2.5V per cell
NEVER dismantle or customize pack wiring in any way or puncture cells
NEVER place on flammable products or leave unattended throughout
    charging
ALWAYS Charge in a fire-resistant area
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of kids

You will certainly love this product if you have the product just above pointed out.

Ez-Peak Plus 4Amp Nimh/Lipo Charger W/ Id Automstic Battery Iden

This is the Traxxas Air Conditioning Powered EZ-Peak Plus Battery Charger
with iD Auto Battery Identification.

FEATURES:
Charges 2-3S LiPo batteries, and 5-8 cell NiMH/NiCd batteries
Acknowledges Traxxas iD batteries and immediately programs and
    optimizes battery charger settings
One button LiPo storage charge
4amp fast charging
2S/3S Integrated balance ports for standard LiPo batteries
    situated under Traxxas nameplate to the left of output port
Charge development indication
High resolution peak detection
Storage mode prepares LiPo batteries for extended storage
Advanced mode for full manual control, as well as for batteries that
    do not have the iD Auto Battery Recognition
Easy to utilize interface
Integrated cooling fan
Thirty day minimal warranty through Traxxas beginning at date of
    purchase

INCLUDES:
EZ-Peak Plus Battery Charger with Air Conditioning Power Cable and Directions

NEEDS:
LiPo charging bag

SPECIFICATIONS:
Air Conditioning Input: 100-240 volts
Charge Current Range: 1.0 - 4.0A (40W max)
Discharge Current Range: 500mAh
Existing Drain for Balance Ports: 500mAh
NiMH Battery Cell Count: 5-8 cells
LiPo Cell Count: 2-3 cells
Net Weight: 12.8oz (365g)
Measurements: 5.7 x 4.8 x 2.08" (146 x 123 x 53mm)

Want an additional excellent thing to compliment the above pointed out thing?

Ez-Peak Plus Plus 100 Watt Nimh/Lipo Dual Charger W/ Id System

This is the Air Conditioning Powered Traxxas EZ-Peak 100W Double Battery Charger
with iD Auto Battery Identification.

FEATURES:
Charges 2S and THREE LiPo batteries
5-8 cell NiMH batteries
Traxxas's iD technology immediately sets up and optimizes charge
    settings for Traxxas iD geared up batteries
Charges 2 batteries concurrently at as much as 50W (4 amps) each, or
    charges single battery at 100W (8 amp) output in High-Output
    mode
Charges a NiMH and LiPo at the very same time
Advanced Mode for full manual control of battery charger settings
Progress bar and audible informs
Storage Mode prepares LiPo batteries for extended storage
Thirty Days minimal warranty through Traxxas beginning at date of
    purchase

INCLUDES:
Traxxas EZ-Peak 100W Double Battery Charger with Air Conditioning Power Cable,
    Directions, Cooling Fan

SPECIFICATIONS:
Input Power: 100-240V/50-60Hz
Output: 100W max
Charge Current: 1-4A (double mode), 5-8A (high output mode)
Discharge Current Range: 500mA
Existing Drain for Balance Ports: 500mA
Weight: 20.3oz (575g)
Measurements: 7 x 5.4 x 2.2" (176 x 138 x 57mm)