JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Traxxas 4Mm Flanged Nylock Nuts (8) (Traxxas 3647 | TRA3647)

Top Seller

Model: Traxxas 3647
Dist. #: TRA3647   SKU: TRA3647

Be the first to review this product. (Write Review)

Shipping: In Stock For Shipping
Store Pickup:

South Jordan, UT
Available Now!

Price:  $4.19

This item will earn you 4 reward point(s).
4 points = $0.08 off your next order. Learn More

Updated on Mar 28, 2024 05:06:44 AM

Nuts 4mm Nylon Locking VXL (8)...
This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated building and construction

INCLUDES:
Eiqht 4mm flanged nylon locking nuts

SPECS:
Outdoors diameter: 7mm

Here is an additional product that praises the product being talked about.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

This product is often acquired with the above discussed product.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Here is a excellent product that lots of others have actually bought at the very same time.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building and construction
Natural refined color

INCLUDES:
Twelve Body Clips

SPECS:
Length: 26mm

The listed below product additionally pairs truly well with the product being talked about.

Front Axles (2) (R & S)

This is a Pair of Stock Replacement Front Axles for the Rustler and Stampede.
These lie in the front steering blocks.

FEATURES:
Steel building and construction
Natural color

INCLUDES:
Two front axles

REQUIRES:
Nothing. These are direct replacement parts.

SPECS:
Length: 32mm (1.26")
Size: 5mm

COMMENTS:
These will not work for the nitro versions. For that axle, usage
    TRAC2536.

Here is a excellent product that lots of others have actually bought at the very same time.

Caster Blocks 30 Degree (L&R) Slash / Stampede / Rustler

These are Castor Blocks for the Traxxas
Rustler and Stampede.

FEATURES:
Black Plastic Building and construction

INCLUDES:
Two Blocks

REQUIRES:
Traxxas Rustler or Stampede

Numerous others have actually acquired this product together with the product that you are presently checking out.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
Two Front bearing (hub) carriers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

Here is a excellent product that lots of others have actually bought at the very same time.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs install to the front A-arms and is what the
guiding knuckles connect to.

FEATURES:
Nylon building and construction, black in color
Stamped right and delegated guarantee correct setup

INCLUDES:
Two RPM 30° Front Caster Blocks

REQUIRES:
Assembly between A-arms and guiding knuckles

You will love this item if you have the item previously discussed.

Susp Screw Pin Set #2640 (Hex Drive)

These are the Suspension Screws Pins for the
Traxxas Rustler, Stampede and Bandit.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Resilient steel building and construction

INCLUDES:
Two 48mm pins
Two 34mm pins
Two 30mm pins
Two 28mm pins
Two 25mm pins

REQUIRES:
Setup on the Rustler, Stampede or Outlaw

COMMENTS:
For a total suspension pin set order TRAC4940

You will love this item if you have the item previously discussed.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FUNCTIONS:
Made from stainless-steel
This is used to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electrical
(not Nitro) Rustler
Also called the vertical kingpin

INCLUDES:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

Frequently Bought Together

Traxxas 4Mm Flanged Nylock Nuts (8)
+
Traxxas Hex Hubs & Axle Pins Slash
+
Traxxas 5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo
This Item: Traxxas 4Mm Flanged Nylock Nuts (8)
$4.19
Traxxas Hex Hubs & Axle Pins Slash
$2.99
Traxxas 5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo
$4.49

Total Price: $11.67

Add All Three To Cart

Customers who bought this product also purchased

Visual Parts Finder
";