Traxxas 4Mm Flanged Nylock Nuts (8)

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated building and construction

INCLUDES:
Eiqht 4mm flanged nylon locking nuts

SPECS:
Outdoors diameter: 7mm

Here is one more thing that praises the thing being gone over.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

This thing is regularly gotten with the above pointed out thing.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Here is a fantastic thing that lots of others have bought at the same time.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building and construction
Natural polished color

INCLUDES:
Twelve Body Clips

SPECS:
Length: 26mm

The below thing also sets actually well with the thing being gone over.

Front Axles (2) (R & S)

This is a Set of Stock Replacement Front Axles for the Rustler and Stampede.
These lie in the front steering blocks.

FEATURES:
Steel building and construction
Natural color

INCLUDES:
Two front axles

NEEDS:
Absolutely nothing. These are direct replacement parts.

SPECS:
Length: 32mm (1.26")
Diameter: 5mm

COMMENTS:
These will not work for the nitro versions. For that axle, usage
    TRAC2536.

Here is a fantastic thing that lots of others have bought at the same time.

Caster Blocks 30 Degree (L&R) Slash / Stampede / Rustler

These are Castor Blocks for the Traxxas
Rustler and Stampede.

FEATURES:
Black Plastic Building and construction

INCLUDES:
Two Blocks

NEEDS:
Traxxas Rustler or Stampede

Numerous others have gotten this thing in addition to the thing that you are currently reviewing.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
Two Front bearing (hub) carriers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

Here is a fantastic thing that lots of others have bought at the same time.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs mount to the front A-arms and is exactly what the
steering knuckles connect to.

FEATURES:
Nylon building and construction, black in color
Stamped right and delegated guarantee right installation

INCLUDES:
Two RPM 30° Front Caster Blocks

NEEDS:
Assembly in between A-arms and steering knuckles

You will certainly like this item if you have the item earlier mentioned.

Susp Screw Pin Set #2640 (Hex Drive)

These are the Suspension Screws Pins for the
Traxxas Rustler, Stampede and Bandit.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Long lasting steel building and construction

INCLUDES:
Two 48mm pins
Two 34mm pins
Two 30mm pins
Two 28mm pins
Two 25mm pins

NEEDS:
Installation on the Rustler, Stampede or Bandit

COMMENTS:
For a total suspension pin set order TRAC4940

You will certainly like this item if you have the item earlier mentioned.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FUNCTIONS:
Made of stainless-steel
This is used to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electrical
(not Nitro) Rustler
Likewise called the vertical kingpin

INCLUDES:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97