Traxxas 5 X 10 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X10mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

SUCHES AS:
(2) 5X10mm ball bearings, Part #5115

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 3/8" (10mm)
Width: 5/32" (4mm)

The listed below product additionally pairs truly well with the product being talked about.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Construction
Protected with blue rubber seals

SUCHES AS:
Two Ball Bearings

REQUIRES:
Assembly to car

SPECS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Density: 4mm

COMMENTS:
These bearings are used to support the Primary Clutch (one needed).

Regularly purchased with the product that you are presently reviewing.

Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Just (No Wires).

FUNCTIONS:
Shrouded wire connections (no diminish tube needed)
Wide area, gold-plated terminals
Reverse polarity security makes it difficult to connect backwards
Textured surface area for easy gripping
Compatible with high-current 12-gauge wire
Secure, favorable locking spring crammed terminals for consistent
    contact
Numerous locking barbs keep terminals protect

SUCHES AS:
One black female plastic connector
One black male plastic connector
Two sets of gold metal pins
Guideline sheet

REQUIRES:
Soldering wires to the metal pins

Get this product to improve the one you read around.

Ptfe (Teflon) Clutch Shoe And Spring Set, (3Pcs), Savage X

This is the Clutch Shoe and Spring Set for the HPI Savage .25
The shoes mount to the flywheel and the springs hang on the shoes.

FEATURES:
Nylon construction
Black in color
Metal black springs

SUCHES AS:
Two nylon clutch shoes
Two black metal clutch springs

REQUIRES:
Assembly onto car

Here is a wonderful product that numerous others have actually bought at the very same time.

4.0Mm X 14 Socket Head Cap Screws, 4/Pkg

These are Socket Head Cap Screws by Dubro

FUNCTIONS:
Black metal construction

SUCHES AS:
Four 4.0x14mm screws

REQUIRES:
2.5mm hex wrench, GPMR8012

This is a amazing enhancement to the product presently being talked about.

2' Super Blue Silicone Tubing Medium (3/32" Id)

This Is 2 Feet of Medium Super Blue Silicone Tubing from Du-Bro.

FUNCTIONS:
For Glo-Fuel only.
Won't fracture or harden.
Fits firmly on fuel fitting.
This is a great size for .10 thru .60 size engines.

INCLUDES:
2 Feet of Medium Super Blue Silicone Tubing

REQUIRES:
Fuel Fitting
Glo-Fuel

SPECS:
Inner Diameter: 3/32" (2.3mm)
Length: 2'

Want an additional wonderful product to match the above pointed out product?



This is a set of 3.8" Pro-Line Monster Truck M2 Trencher Tires Installed
on Desperado 1/2" Offset Black Wheels.

FEATURES:
Fits the front or back of beast trucks with 17mm hex
Horizontal H-shaped tread almost 1/4" (6.5mm) high for big quantities
    of forward bite with high degree of durability and resilience
Increased sidewall thickness to withstand tearing at the bead
M2 medium compound
1/2" offset wheel for Traxxas Top fans or any beast trucks that
    need higher stability
Six-spoke nylon wheels, black in color

SUCHES AS:
Two 3.8" M2 Trencher Tires and two Desperado 1/2" Offset Black Wheels

REQUIRES:
Installing to car

SPECS:
Tires-
Diameter: 6.50" (165mm)
Width: 4.15" (105mm)
    Wheels-
Installing Dia.: 3.82" (97mm)
Width: 2.75" (70mm)
Hex Size: 17mm
Offset: 1/2" (12.5mm)