Traxxas 12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Center Ball Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless-steel Building
Blue Rubber Sealed

CONSISTS OF:
2 12mm x 18mm Blue Sealed Stainless Wheel Center Bearings

REQUIRES:
Assembly onto Car

SPECIFICATIONS:
Outer Size: 18mm (0.70")
Inner Size: 12mm (0.47")
Density: 4mm (0.15")

REMARKS:
These are for the Inside of the Wheel Centers, the Truck Needs
4 Total of these Bearings.

This is a fantastic enhancement to the item presently being reviewed.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building
Shielded with blue rubber seals

CONSISTS OF:
2 Ball Bearings

REQUIRES:
Assembly to vehicle

SPECIFICATIONS:
Inner Size: 10mm
External Size: 15mm
Side Density: 4mm

REMARKS:
These bearings are utilized to support the Main Clutch (one required).

Want an additional fantastic item to compliment the above mentioned item?

Bbs Blue Rubber Sealed 6 X 13M

This is a set of Traxxas 6x13x5mm Ball Bearings
for use on the E-Revo

FEATURES:
Stainless-steel bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 6x13x5mm ball bearings Part #5180

SPECIFICATIONS:
Inside size: 6mm (0.24")
Outside size: 13mm (0.51")
Width: 5mm (0.20")

Want an additional fantastic item to compliment the above mentioned item?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This item is frequently purchased with the above mentioned item.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) ball bearings, Part #5117

SPECIFICATIONS:
Inside size: 6mm
Outside size: 12mm
Width: 4mm

REMARKS:
This bearing set is utilized in the transmission and differentials of
    the Revo.

The below item also pairs actually well with the item being reviewed.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Building
Blue Rubber Sealed

CONSISTS OF:
2 8mm x 16mm Rubber Sealed Bearings

REQUIRES:
Assembly onto Car

SPECIFICATIONS:
Inner Size: 8mm (0.31")
Outer Size: 16mm (0.62")
Density: 5mm (0.19")

Many others have purchased this item along with the item that you are presently checking out.

Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FEATURES:
Totally put together
Plastic telescoping driveshaft with steel universals
Blue rubber boot shields telescoping sections from dirt
Attaches to the differential with one screw pin
Functions on the front or rear, right or left of vehicle

CONSISTS OF:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Instruction sheet

REQUIRES:
Setting up on chassis

The below item also pairs actually well with the item being reviewed.

Housings, Differential, Rear

This is the Rear Differential Housing for the Traxxas Slash 4x4.

FEATURES:
Hardened plastic building and construction
Black in color

CONSISTS OF:
2 rear differential real estate halves

REQUIRES:
Installation around diff components