Traxxas 4Mm Alum Flanged Nylock Nuts Blue (4)

These are the 4mm Flanged Nylon Locknuts from Traxxas.

FEATURES:
Aluminum building and construction anodized blue in color
Serrated on the back for sure grip

CONSISTS OF:
Four 4mm Flanged Nylon Locknuts

REQUIRES:
6mm nut motorist

SPECS:
Hole Size: 4mm
Hex Size: 6mm

Many others have actually bought this product in addition to the product that you are presently reading about.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

This is a fantastic addition to the product presently being discussed.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECS:
Size: 5x8mm
Density: 0.5mm

Many others have actually bought this product in addition to the product that you are presently reading about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Often bought with the product that you are presently reading about.

CNC Mach Alum Lock-Pin Hex Adapter Stampede

This is the 12mm Lock-Pin Type Hex Hub from ST Racing
For the Traxxas Electric Stampede, Rustler, Bandit, Slash
and Nitro Slash.

FEATURES:
Using high quality CNC machined aluminum, these Lock-pin style alum.
wheel hex locks down on the axle pins so loosing pins are no longer a
problem for your Traxxas electrical Stampede/Rustler/Bandit or the brand-new
Slash. Aluminum hex are also more resilient and less most likely to strip
out and provides a much better fit to the wheel hex.

These are blue in color.

INCLUDES:
Four hex hubs
One 1.5mm Allen L-wrench

SPECS:
Width: 12mm (15/32")
Density: 6mm (5/16")
Size, hole: 5.5mm (7/32")

COMMENTS:
These adapters can be installed on
Traxxas Stampede (TRAC23** & TRAD14**)
Traxxas Rustler (TRAC14**)
Traxxas Slash (TRAD19** & TRAD27**)
Traxxas Bandit (TRAD13**)
Traxxas Nitro Slash (TRAD77**)

This product compliments the main item here.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FEATURES:
Made of stainless-steel
This is used to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electrical
(not Nitro) Rustler
Also called the vertical kingpin

CONSISTS OF:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

This is a fantastic addition to the product presently being discussed.

Spur Gear (90T) 48P

This is a Traxxas 48P, 90T Spur Equipment for models
with Torque Control Slipper Clutch.

FEATURES:
48 pitch
90 tooth
Designed for models with a slipper clutch
Black plastic building and construction

CONSISTS OF:
One spur gear

SPECS:
Pitch: 48
Tooth: 90

COMMENTS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 86T gear (TRAC4686).