Traxxas 49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Links
for the Outlaw, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
Two rear 49mm (82mm center to center) turnbuckles

NEEDS:
Setup on the car

This thing is regularly purchased with the above discussed thing.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
Two front 39mm (69mm center to center) turnbuckles and instruction
    sheet

NEEDS:
Setup on the car

The listed below thing additionally pairs truly well with the thing being gone over.

Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Links
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
Two 61mm (96mm center to center) turnbuckles

NEEDS:
Setup on the car

Want another terrific thing to match the above discussed thing?

58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Links
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends
Can be Used on Front or Rear

CONSISTS OF:
Two 58mm Threaded Rods
4 3mm Ball Ends
4 3mm Hollow Balls

NEEDS:
Assembly onto Automobile

This thing is regularly purchased with the above discussed thing.



This is an optional Pro-Line ProTrac Suspension Set Rear Arms
for usage on the 1/10 scale Traxxas Slash.

FEAUTRES:
Nylon building and construction, black in color
Increases forward velocity, corner speed, consistency and
    drivability

CONSISTS OF:
Two rear arms
One Proline decal

NEEDS:
Setup onto car

This thing is regularly purchased with the above discussed thing.



This is an optional Pro-Line ProTrac Suspension Set Front Arms
for usage on the 1/10 scale 2WD Traxxas Slash.
**Will not deal with the 4x4 Slash.**

FEAUTRES:
Nylon building and construction, black in color
Increases forward velocity, corner speed, consistency and
    drivability

CONSISTS OF:
Two front arms
One Proline decal

NEEDS:
Setup onto car

Right here is a terrific thing that numerous others have actually purchased the same time.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building and construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on car

You will love this thing if you have the thing just above stated.

Steering Drag Link 3905

    This is the Steering Drag Link for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building and construction, black and silver in color

CONSISTS OF:
One steering drag link (4x72mm turnbuckle, rod ends and hollow balls)

NEEDS:
Setup on the car

SPECS:
Length: 3.93" (100mm)
Shaft diamter: .15" (4mm)

This thing is regularly purchased with the above discussed thing.

3 X 15Mm Button Hex Screw (6)

This is a package of six 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building and construction, Black in color
Used on the Traxxas Revo monster truck, can also be used in any
    application where a 3x15mm button head screw is required

CONSISTS OF:
Six 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Diameter: 3mm