Traxxas 46Mm Turnbuckles

These are replacement 36mm turnbuckles for Traxxas trucks.

Includes: 2- 36mm threaded turnbuckles w/nut for simple change.
2- 2x6,2.5mm thick aluminum spacers

Remark: The spacers are for spacing the ball end far from the transmission
bulkhead.

This thing praises the main item right here.

Rod Ends/Ball Connector (6)

These are 5.8mm ball ends and balls use in the LS II race truck kit.

Kit includes: 6ea 5.8mm metal balls
6ea 5.8mm white nylon ball ends

pcd 01/10/94

Frequently gotten with the thing that you are currently checking out.

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Package for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Decreases the chassis 1" (25.4mm) for much better handling and greater
    catching speed
Holds battery and electronics as deep in chassis as possible
45% lower battery position

INCLUDES:
Chassis
Lower Chassis
2 Nerf Bars
Battery Hold Down with Front and Rear Retainers
2 Front Shock Springs
Hardware and Instructions

Frequently gotten with the thing that you are currently checking out.



This is the Brief Course Racing Truck Body for the Traxxas Slash and Slayer
with the #47 Mike Jenkins Trim Scheme.

FEATURES:
Trimmed and painted with a red and black color design

INCLUDES:
#47 Mike Jenkins Trim Plan Body for the Traxxxas Slash and Slayer

NEEDS:
Fastening to body posts

SPECS:
Length: 21.25" (540mm)
Width: 11.5" (292mm)
Height: 5.5" (140mm)

COMMENTS:
Likewise offered in the same color design as the #25 Mark Jenkins body,
    TRAC6825.