Traxxas 31T Pinion 48P

This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw
from Traxxas.

FEATURES:
Steel building, silver in color

INCLUDES:
One 31 Tooth, 48 Pitch Pinion Gear
One 3x4mm Set Screw (1.5mm hex size)

REQUIRES:
Installation

SPECS:
Length: .42" (10.5mm)
Inside Size: 1/8"
Outdoors Size: .69" (17.5mm)

Below is a terrific thing that many others have actually purchased the very same time.

Spur Gear (76T) 48P

This is a 48P, 76T Spur Gear for designs with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
76 tooth
Created for designs with a slipper clutch.
Black plastic building

INCLUDES:
One spur gear

SPECS:
Pitch: 48
Tooth: 76

COMMENTS:
For this slipper clutch design there is also a 86T gear (TRAC4686),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

This thing is often purchased with the above pointed out thing.

26T Pinion 48P

This is a 26 Tooth, 48 Pitch Pinion Gear with Set Screw
from Traxxas.

FEATURES:
Steel building, silver in color

INCLUDES:
One 26 Tooth, 48 Pitch Pinion Gear
One 3x4mm Set Screw (1.5mm hex size)

REQUIRES:
Installation

SPECS:
Length: .42" (10.5mm)
Inside Size: 1/8"
Outdoors Size: .58" (14mm)

Below is one more thing that compliments the thing being reviewed.

Pinion Gear 48P 25T

This gear is a steel pinion gear in 48 pitch

Functions: Brass pinion gear

Consists of: 1 gear and 1 set screw

Specs: Steel, 48 pitch, 25 tooth pinion gear.
    Shaft length- 3/16" Gear length- 1/4" Total length- 7/16"
    Shaft size- 1/4" Gear size- 1/2"
    Mounting shaft (motor shaft) 1/8"

This thing compliments the above reviewed thing.

Spur Gear 45T Vxl

This is the 45T Spur Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Black in color

INCLUDES:
One 45T Spur Gear

REQUIRES:
Installation on the car

SPECS:
Outer Size: 24.75mm (0.97")
Inner Size: 5.5mm (0.22")
Width: 7mm (0.28")

You will certainly love this product if you have the product previously pointed out.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building

INCLUDES:
One Diff Ring Gear
One Pinion Gear

REQUIRES:
Installation on the car

This thing compliments the main item below.

Pinion Gear 48P 28T 4-Tec

This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec.

FEATURES:
Perfect replacement part for fine tuning your Traxxas 4-Tec 4WD remote
    control sedan.
Metal building

INCLUDES:
One Pinion Gear
One Set Screw

SPECS:
Pearly whites: 28
Pitch: 48

You will certainly love this product if you have the product previously pointed out.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Perfect for 1/16 scale vehicle applications
Prewired with Traxxas high present connector

INCLUDES:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Port

REQUIRES:
Balancer and LiPo compatible charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Score: 11.1V
Rated Capability: 1300mAh
Discharge Score: 25C constant
Measurements: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Stabilizing Port: ElectriFly
Watt Hours: 14Wh

COMMENTS:
ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any method or leak cells
NEVER place on flammable materials or leave unattended throughout
    charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
CONSTANTLY keep out of reach of children
All weights consist of wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm