Traxxas 5 X 8 X 2.5Mm Ball Bearing (2) Blue Rubber Shield Revo

This is a 2 pack of Traxxas 5X8mm Ball Bearings.

FEATURES:
Metal bearing building
Blue rubber dirt guards

CONSISTS OF:
(2) 5X8mm ball bearings Part #5114

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 5/16" (8mm)
Width: 3/32" (2.5mm)

Right here is an additional thing that compliments the thing being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

This thing compliments the above discussed thing.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building
Shielded with blue rubber seals

CONSISTS OF:
2 Ball Bearings

NEEDS:
Assembly to car

SPECIFICATIONS:
Inner Size: 10mm
External Size: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are used to support the Main Clutch (one needed).

You will certainly enjoy this thing if you have the thing just above pointed out.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Center Ball Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Steel Building
Blue Rubber Sealed

CONSISTS OF:
2 12mm x 18mm Blue Sealed Stainless Wheel Center Bearings

NEEDS:
Assembly onto Vehicle

SPECIFICATIONS:
Outer Size: 18mm (0.70")
Inner Size: 12mm (0.47")
Thickness: 4mm (0.15")

COMMENTS:
These are for the Within the Wheel Centers, the Truck Needs
4 Total of these Bearings.

This thing compliments the main item below.

4 X 7 X 2.5Mm Bearings (2) (Rubber Shield

These are a pair of 4x7mm Rubber Sheilded Bearings
from Traxxas for use on the Jato 2.5.

FUNCTIONS:
Rubber protected
Steel building

CONSISTS OF:
2 rubber protected bearings

NEEDS:
Absolutely nothing

SPECIFICATIONS:
Thickness: 2.6mm
Inner Size: 4mm
External Size: 7mm

You will certainly enjoy this thing if you have the thing just above pointed out.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel building
Blue rubber dirt guards

CONSISTS OF:
(2) ball bearings, Part #5117

SPECIFICATIONS:
Inside size: 6mm
Outdoors size: 12mm
Width: 4mm

COMMENTS:
This bearing set is used in the transmission and differentials of
    the Revo.

Right here is an additional thing that compliments the thing being discussed.

Steering Arm Mount Steering St

    This is the Steering Arm Mount for the Traxxas Revo.

FEATURES:
Black plastic building
Requirement and maximum toss guiding stops

CONSISTS OF:
Steering arm install Part #5343X
Guiding stop #5343X

NEEDS:
Setup on the Traxxas Revo

You will certainly enjoy this thing if you have the thing just above pointed out.

Push Rod (Molded Composite) (4

These are the Pushrods and Hollow Balls for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Molded composite building
Red in color

CONSISTS OF:
4 Pushrods
8 Hollow Balls

NEEDS:
Setup on the car

SPECIFICATIONS:
Length: 70mm (2.8")
Size: 5mm (0.20")

This thing compliments the above discussed thing.

Front Bumper Slayer

This is the Front Bumper and Mount for the
    Traxxas Slayer Pro 4WD Short Course Nitro RTR

FUNCTIONS:
Nylon building
Black in color

CONSISTS OF:
One Front Bumper
One Bumper Mount
2 3x25mm Button Cap Screws
2 4x10mm Button Cap Screws

NEEDS:
Setup on the car