Traxxas 5 X 8 X 2.5Mm Ball Bearing (2) Blue Rubber Shield Revo

This is a 2 pack of Traxxas 5X8mm Ball Bearings.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X8mm ball bearings Part #5114

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 5/16" (8mm)
Width: 3/32" (2.5mm)

Here is one more item that compliments the item being reviewed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This item compliments the above reviewed item.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Construction
Protected with blue rubber seals

INCLUDES:
Two Ball Bearings

REQUIRES:
Assembly to automobile

SPECIFICATIONS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Density: 4mm

REMARKS:
These bearings are utilized to support the Main Clutch (one required).

You will certainly enjoy this thing if you have the thing above mentioned.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Center Ball Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Steel Construction
Blue Rubber Sealed

INCLUDES:
Two 12mm x 18mm Blue Sealed Stainless Wheel Center Bearings

REQUIRES:
Assembly onto Car

SPECIFICATIONS:
Outer Diameter: 18mm (0.70")
Inner Diameter: 12mm (0.47")
Density: 4mm (0.15")

REMARKS:
These are for the Inside of the Wheel Centers, the Truck Requires
Four Total of these Bearings.

This item compliments the main item below.

4 X 7 X 2.5Mm Bearings (2) (Rubber Shield

These are a pair of 4x7mm Rubber Sheilded Bearings
from Traxxas for use on the Jato 2.5.

FUNCTIONS:
Rubber shielded
Steel building

INCLUDES:
Two rubber shielded bearings

REQUIRES:
Nothing

SPECIFICATIONS:
Density: 2.6mm
Inner Diameter: 4mm
External Diameter: 7mm

You will certainly enjoy this thing if you have the thing above mentioned.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel building
Blue rubber dirt guards

INCLUDES:
(2) ball bearings, Part #5117

SPECIFICATIONS:
Inside diameter: 6mm
Outdoors diameter: 12mm
Width: 4mm

REMARKS:
This bearing set is utilized in the transmission and differentials of
    the Revo.

Here is one more item that compliments the item being reviewed.

Steering Arm Mount Steering St

    This is the Steering Arm Mount for the Traxxas Revo.

FEATURES:
Black plastic building
Standard and maximum throw steering stops

INCLUDES:
Steering arm mount Part #5343X
Steering stop #5343X

REQUIRES:
Installation on the Traxxas Revo

You will certainly enjoy this thing if you have the thing above mentioned.

Push Rod (Molded Composite) (4

These are the Pushrods and Hollow Balls for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Molded composite building
Red in color

INCLUDES:
Four Pushrods
8 Hollow Balls

REQUIRES:
Installation on the automobile

SPECIFICATIONS:
Length: 70mm (2.8")
Diameter: 5mm (0.20")

This item compliments the above reviewed item.

Front Bumper Slayer

This is the Front Bumper and Mount for the
    Traxxas Slayer Pro 4WD Short Course Nitro RTR

FUNCTIONS:
Nylon building
Black in color

INCLUDES:
One Front Bumper
One Bumper Mount
Two 3x25mm Button Cap Screws
Two 4x10mm Button Cap Screws

REQUIRES:
Installation on the automobile