Traxxas 5 X 8 X 2.5Mm Ball Bearing (2) Blue Rubber Shield Revo

This is a 2 pack of Traxxas 5X8mm Ball Bearings.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X8mm ball bearings Part #5114

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 5/16" (8mm)
Width: 3/32" (2.5mm)

Below is an additional item that compliments the item being gone over.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This item compliments the above gone over item.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building
Protected with blue rubber seals

INCLUDES:
Two Ball Bearings

NEEDS:
Assembly to vehicle

SPECIFICATIONS:
Inner Size: 10mm
External Size: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are used to support the Main Clutch (one needed).

You will love this product if you have the product previously discussed.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Hub Ball Bearings for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Stainless Steel Building
Blue Rubber Sealed

INCLUDES:
Two 12mm x 18mm Blue Sealed Stainless Wheel Hub Bearings

NEEDS:
Assembly onto Automobile

SPECIFICATIONS:
Outer Size: 18mm (0.70")
Inner Size: 12mm (0.47")
Thickness: 4mm (0.15")

COMMENTS:
These are for the Inside of the Wheel Hubs, the Truck Requires
4 Overall of these Bearings.

This item compliments the main item below.

4 X 7 X 2.5Mm Bearings (2) (Rubber Shield

These are a pair of 4x7mm Rubber Sheilded Bearings
from Traxxas for usage on the Jato 2.5.

FEATURES:
Rubber protected
Steel building

INCLUDES:
Two rubber protected bearings

NEEDS:
Nothing

SPECIFICATIONS:
Thickness: 2.6mm
Inner Size: 4mm
External Size: 7mm

You will love this product if you have the product previously discussed.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel building
Blue rubber dirt guards

INCLUDES:
(2) ball bearings, Part #5117

SPECIFICATIONS:
Inside diameter: 6mm
Outdoors diameter: 12mm
Width: 4mm

COMMENTS:
This bearing set is used in the transmission and differentials of
    the Revo.

Below is an additional item that compliments the item being gone over.

Steering Arm Mount Steering St

    This is the Steering Arm Mount for the Traxxas Revo.

FEATURES:
Black plastic building
Requirement and maximum toss guiding stops

INCLUDES:
Steering arm mount Part #5343X
Steering stop #5343X

NEEDS:
Installation on the Traxxas Revo

You will love this product if you have the product previously discussed.

Push Rod (Molded Composite) (4

These are the Pushrods and Hollow Balls for usage on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Molded composite building
Red in color

INCLUDES:
4 Pushrods
Eight Hollow Balls

NEEDS:
Installation on the vehicle

SPECIFICATIONS:
Length: 70mm (2.8")
Size: 5mm (0.20")

This item compliments the above gone over item.

Front Bumper Slayer

This is the Front Bumper and Mount for the
    Traxxas Slayer Pro 4WD Short Course Nitro RTR

FEATURES:
Nylon building
Black in color

INCLUDES:
One Front Bumper
One Bumper Mount
Two 3x25mm Button Cap Screws
Two 4x10mm Button Cap Screws

NEEDS:
Installation on the vehicle