Traxxas 5 X 8 X 2.5Mm Ball Bearing (2) Blue Rubber Shield Revo

This is a 2 pack of Traxxas 5X8mm Ball Bearings.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X8mm ball bearings Part #5114

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 5/16" (8mm)
Width: 3/32" (2.5mm)

Here is an additional item that compliments the item being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

This item compliments the above discussed item.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building and construction
Protected with blue rubber seals

INCLUDES:
2 Ball Bearings

REQUIRES:
Assembly to car

SPECIFICATIONS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are used to support the Main Clutch (one needed).

You will certainly like this thing if you have the thing earlier discussed.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Hub Ball Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Steel Building and construction
Blue Rubber Sealed

INCLUDES:
2 12mm x 18mm Blue Sealed Stainless Wheel Hub Bearings

REQUIRES:
Assembly onto Car

SPECIFICATIONS:
Outer Diameter: 18mm (0.70")
Inner Diameter: 12mm (0.47")
Thickness: 4mm (0.15")

COMMENTS:
These are for the Within the Wheel Hubs, the Truck Needs
Four Overall of these Bearings.

This item compliments the main item right here.

4 X 7 X 2.5Mm Bearings (2) (Rubber Shield

These are a pair of 4x7mm Rubber Sheilded Bearings
from Traxxas for usage on the Jato 2.5.

FUNCTIONS:
Rubber shielded
Steel building

INCLUDES:
2 rubber shielded bearings

REQUIRES:
Nothing

SPECIFICATIONS:
Thickness: 2.6mm
Inner Diameter: 4mm
Outer Diameter: 7mm

You will certainly like this thing if you have the thing earlier discussed.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel building
Blue rubber dirt guards

INCLUDES:
(2) ball bearings, Part #5117

SPECIFICATIONS:
Inside size: 6mm
Outdoors size: 12mm
Width: 4mm

COMMENTS:
This bearing set is used in the transmission and differentials of
    the Revo.

Here is an additional item that compliments the item being discussed.

Steering Arm Mount Steering St

    This is the Steering Arm Mount for the Traxxas Revo.

FEATURES:
Black plastic building
Requirement and maximum throw steering stops

INCLUDES:
Steering arm mount Part #5343X
Guiding stop #5343X

REQUIRES:
Setup on the Traxxas Revo

You will certainly like this thing if you have the thing earlier discussed.

Push Rod (Molded Composite) (4

These are the Pushrods and Hollow Balls for usage on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Molded composite building
Red in color

INCLUDES:
Four Pushrods
Eight Hollow Balls

REQUIRES:
Setup on the car

SPECIFICATIONS:
Length: 70mm (2.8")
Diameter: 5mm (0.20")

This item compliments the above discussed item.

Front Bumper Slayer

This is the Front Bumper and Mount for the
    Traxxas Slayer Pro 4WD Short Course Nitro RTR

FUNCTIONS:
Nylon building
Black in color

INCLUDES:
One Front Bumper
One Bumper Mount
2 3x25mm Button Cap Screws
2 4x10mm Button Cap Screws

REQUIRES:
Setup on the car