Traxxas 23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas

FEATURES:
Pinion equipment with set screw, Silver in color

CONSISTS OF:
(1) 23 Tooth 48 Pitch Pinion Gear
(1) One 4mmx2mm set screw

NEEDS:
Installation

SPECS:
Outer Diameter: 14mm (9/16")
Inner Diameter: 11mm (7/16")

Regularly acquired with the thing that you are currently reviewing.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for designs with a slipper clutch.
Black plastic construction

CONSISTS OF:
One spur equipment

SPECS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is also a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 90T equipment (TRAC4690).

You will enjoy this product if you have the product earlier pointed out.

19T Pinion 48P

This is a Traxxas 19T 48P Pinion Gear.

FEATURES:
Metal construction
Grey in color

CONSISTS OF:
One 19T 48P Pinion Gear
One Set Screw

NEEDS:
Installation

This thing compliments the main item here.

Alum Slipper Pressure Plate & Hub Jato

These are the Slipper Press Plate and Center
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Pot Metal Building
Silver in Color

CONSISTS OF:
One Slipper Press Plate
One Slipper Press Plate Center

NEEDS:
Assembly onto Automobile

Want another wonderful thing to match the above pointed out thing?

Rebuild Kit, Slipper Clutch (S

This is the Slipper Clutch Rebuild Package for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Steel construction

CONSISTS OF:
One Steel Disc
Two Friction Pads
2 Springs
One 4mm Lock Nut
One 5mm Lock Nut
Instructions

NEEDS:
Disassembly of slipper clutch

Below is another thing that compliments the thing being reviewed.

Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Package for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts enable a wide array of bodies
    to be used consisting of rally automobile bodies
Constructed of nylon, black in color
Screw-on body mount system eliminates metal clips

CONSISTS OF:
Front and Rear Body Installs and Publishes with Mounting Hardware

You will enjoy this product if you have the product earlier pointed out.

Pinion Gear 16T 48P W/Screw Set

    This is the 16 Tooth 48 Pitch Pinion Gear from Traxxas.

FEATURES:
Steel construction

CONSISTS OF:
16 Tooth 48 Pitch Pinion Gear with set screw

NEEDS:
Setting up on motor shaft

SPECS:
Number of Pearly whites: 16T
Pitch: 48
Inner Diameter: 0.12" (3mm)

Regularly acquired with the thing that you are currently reviewing.

Sealed Receiver Box (Slash)

This is the Receiver Box for the 2WD Traxxas Slash Truck.

FEATURES:
Replaces broken receiver boxes
Constructed of black plastic

CONSISTS OF:
One top and bottom half receiver box for the Traxxas Slash
Hardware

NEEDS:
Setting up receiver and bolting receiver box to chassis.

The below thing also sets truly well with the thing being reviewed.

Nerf Bars, Chassis (Slash)

These are the replacement Nerf Bars for the 2WD Traxxas Slash.

FEATURES:
Black plastic construction

CONSISTS OF:
2 Nerf Bars for the Traxxas Slash

NEEDS:
Installation onto Automobile

Want another wonderful thing to match the above pointed out thing?

Hold Down, Battery Slash

This is the Hold Down Battery Set for the 2WD Traxxas Slash.

FEATURES:
Black nylon construction

CONSISTS OF:
One Battery Hold Down
One Retainer Hold Down
One Battery Post
One Foam Spacer
One Angled Body Clip

NEEDS:
Installation on the chassis