Traxxas 23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Equipment By Traxxas

FEATURES:
Pinion gear with set screw, Silver in color

CONSISTS OF:
(1) 23 Tooth 48 Pitch Pinion Equipment
(1) One 4mmx2mm set screw

NEEDS:
Setup

SPECIFICATIONS:
Outer Diameter: 14mm (9/16")
Inner Diameter: 11mm (7/16")

Regularly purchased with the product that you are currently checking out.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for models with a slipper clutch.
Black plastic building

CONSISTS OF:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

You will certainly love this product if you have the product just above mentioned.

19T Pinion 48P

This is a Traxxas 19T 48P Pinion Gear.

FEATURES:
Metal building
Grey in color

CONSISTS OF:
One 19T 48P Pinion Equipment
One Set Screw

NEEDS:
Setup

This product praises the main item here.

Alum Slipper Pressure Plate & Hub Jato

These are the Slipper Press Plate and Center
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Pot Metal Construction
Silver in Color

CONSISTS OF:
One Slipper Press Plate
One Slipper Press Plate Center

NEEDS:
Assembly onto Vehicle

Want another excellent product to match the above mentioned product?

Rebuild Kit, Slipper Clutch (S

This is the Slipper Clutch Rebuild Kit for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Steel building

CONSISTS OF:
One Steel Disc
Two Friction Pads
2 Springs
One 4mm Lock Nut
One 5mm Lock Nut
Guidelines

NEEDS:
Disassembly of slipper clutch

Right here is another product that praises the product being discussed.

Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts permit a variety of bodies
    to be used including rally automobile bodies
Constructed of nylon, black in color
Screw-on body mount system eliminates metal clips

CONSISTS OF:
Front and Rear Body Mounts and Publishes with Mounting Hardware

You will certainly love this product if you have the product just above mentioned.

Pinion Gear 16T 48P W/Screw Set

    This is the 16 Tooth 48 Pitch Pinion Equipment from Traxxas.

FEATURES:
Steel building

CONSISTS OF:
16 Tooth 48 Pitch Pinion Equipment with set screw

NEEDS:
Installing on motor shaft

SPECIFICATIONS:
Number of Teeth: 16T
Pitch: 48
Inner Diameter: 0.12" (3mm)

Regularly purchased with the product that you are currently checking out.

Sealed Receiver Box (Slash)

This is the Receiver Box for the 2WD Traxxas Slash Truck.

FEATURES:
Replaces broken receiver boxes
Constructed of black plastic

CONSISTS OF:
One top and bottom half receiver box for the Traxxas Slash
Hardware

NEEDS:
Installing receiver and bolting receiver box to chassis.

The listed below product also sets actually well with the product being discussed.

Nerf Bars, Chassis (Slash)

These are the replacement Nerf Bars for the 2WD Traxxas Slash.

FEATURES:
Black plastic building

CONSISTS OF:
2 Nerf Bars for the Traxxas Slash

NEEDS:
Setup onto Vehicle

Want another excellent product to match the above mentioned product?

Hold Down, Battery Slash

This is the Hold Down Battery Set for the 2WD Traxxas Slash.

FEATURES:
Black nylon building

CONSISTS OF:
One Battery Hold Down
One Retainer Hold Down
One Battery Post
One Foam Spacer
One Tilted Body Clip

NEEDS:
Setup on the chassis