Traxxas 17T Pinion Gear 32P

This is a 17 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is connected straight to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

INCLUDES:
One 17 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This gear is only one of two which are utilized on the E-Maxx dual motor
    set-up.

Frequently acquired with the thing that you are presently reading about.

15T Pinion Gear 32P

This is a 15 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is connected straight to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

INCLUDES:
One 15 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This gear is only one of two which are utilized on the E-Maxx dual motor
    set-up.

Get this thing to improve the one you read around.

19T Pinion Gear 32P

This is a 19 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is connected straight to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

INCLUDES:
One 19 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This gear is only one of two which are utilized on the E-Maxx dual motor
    set-up.

Here is another thing that compliments the thing being reviewed.

Drive Hub, Center, Rear (1)/ F

This is the Front and Rear Center Drive Hub Set for use on the
Traxxas Slash 4x4 Vehicles.

FEATURES:
Nylon and steel building

INCLUDES:
One Front Center Drive Hub
One Rear Center Drive Hub
One Screw Pin

REQUIRES:
Installation in drive assembly

Many others have actually acquired this thing together with the thing that you are presently reading about.

3 X 15Mm Button Hex Screw (6)

This is a package of six 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Utilized on the Traxxas Revo monster truck, can also be utilized in any
    application where a 3x15mm button head screw is needed

INCLUDES:
Six 3x15mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Diameter: 3mm

This thing is often acquired with the above mentioned thing.

Horn Bracket 4-40 3/32"

These are 3/32" EZ Change Horn Brackets for 4-40 Threads

FUNCTIONS:
Nylon building

INCLUDES:
Four horn brackets

REQUIRES:
A rod with 4-40 threads

Here is a great thing that numerous others have actually bought at the same time.



This is the Sidewinder SCT ESC and 3800kV Motor Combination from Castle Creations.

FEATURES:
Perfect for 2WD or 4WD short course racing or yard bashing
Neu-Castle 4 pole 1410 1Y motor has 50% more torque than Castle's
    CM36 series
Sidewinder SCT has 40% greater power handling than previous
    Sidewinder 1/10 scale ESC
Castle Link suitable (Field Link Portable Developer Vehicle Card
    (CSEM6300) needed, not consisted of)
Proportional brake with reverse lockout
Waterproof*

INCLUDES:
Castle Creations Sidewinder SCT ESC, 4mm Bullet Motor Connectors and
    Neu-Castle 4 pole 1410 1Y Brushless Motor, Guidelines

REQUIRES:
Battery port of modeler's choice

SPECS:
ESC
Input Voltage: Optimum 2S LiPo
Brake: Proportional
Reversible: Yes, with lockout
Width: 1.48" (37.5mm)
Length: 1.93" (49mm)
Height: 1.18" (30mm)
Weight: 2.29oz (65g) without battery port
    Motor:
Pole Count: 4
Stator Lamination Thickness: 0.0078" .2mm
Bearings: CNC rated Japanese bearings
Dimensions: 1.4 x 2.1" (36 x 53mm)
Shaft Diameter: 1/8" (3.2mm)

COMMENTS:
*Not intended for operation while submerged in liquid. If device is
    run in damp conditions, wash with fresh water to remove dirt
    or corrosives, then completely dry unit.
Maximum advised vehicle weight is 6.5pounds (2.95kg)