Traxxas 17T Pinion Gear 32P

This is a 17 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is connected directly to the motor.

FEATURES:
Machined Steel
Developed for a 3mm shaft

CONSISTS OF:
One 17 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is just one of 2 which are used on the E-Maxx dual motor
    set-up.

Frequently bought with the thing that you are presently reviewing.

15T Pinion Gear 32P

This is a 15 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is connected directly to the motor.

FEATURES:
Machined Steel
Developed for a 3mm shaft

CONSISTS OF:
One 15 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is just one of 2 which are used on the E-Maxx dual motor
    set-up.

Get this thing to improve the one you read about.

19T Pinion Gear 32P

This is a 19 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is connected directly to the motor.

FEATURES:
Machined Steel
Developed for a 3mm shaft

CONSISTS OF:
One 19 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is just one of 2 which are used on the E-Maxx dual motor
    set-up.

Here is one more thing that compliments the thing being talked about.

Drive Hub, Center, Rear (1)/ F

This is the Front and Back Center Drive Hub Set for usage on the
Traxxas Slash 4x4 Vehicles.

FEATURES:
Nylon and steel construction

CONSISTS OF:
One Front Center Drive Hub
One Back Center Drive Hub
One Screw Pin

REQUIRES:
Setup in drive assembly

Many others have actually bought this thing together with the thing that you are presently reviewing.

3 X 15Mm Button Hex Screw (6)

This is a bundle of six 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel construction, Black in color
Utilized on the Traxxas Revo beast truck, can also be used in any
    application where a 3x15mm button head screw is needed

CONSISTS OF:
Six 3x15mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Size: 3mm

This thing is frequently bought with the above mentioned thing.

Horn Bracket 4-40 3/32"

These are 3/32" EZ Adjust Horn Brackets for 4-40 Threads

FEATURES:
Nylon construction

CONSISTS OF:
Four horn brackets

REQUIRES:
A rod with 4-40 threads

Here is a great thing that many others have actually bought at the exact same time.



This is the Sidewinder SCT ESC and 3800kV Motor Combo from Castle Creations.

FEATURES:
Suitable for 2WD or 4WD brief course racing or backyard slamming
Neu-Castle 4 pole 1410 1Y motor has 50% more torque than Castle's
    CM36 series
Sidewinder SCT has 40% greater power handling than previous
    Sidewinder 1/10 scale ESC
Castle Link compatible (Field Link Portable Developer Automobile Card
    (CSEM6300) needed, not included)
Proportional brake with reverse lockout
Water resistant*

CONSISTS OF:
Castle Creations Sidewinder SCT ESC, 4mm Bullet Motor Connectors and
    Neu-Castle 4 pole 1410 1Y Brushless Motor, Guidelines

REQUIRES:
Battery adapter of modeler's choice

SPECIFICATIONS:
ESC
Input Voltage: Optimum 2S LiPo
Brake: Proportional
Reversible: Yes, with lockout
Width: 1.48" (37.5mm)
Length: 1.93" (49mm)
Height: 1.18" (30mm)
Weight: 2.29oz (65g) without battery adapter
    Motor:
Pole Count: 4
Stator Lamination Density: 0.0078" .2mm
Bearings: CNC rated Japanese bearings
Measurements: 1.4 x 2.1" (36 x 53mm)
Shaft Size: 1/8" (3.2mm)

REMARKS:
*Not intended for operation while immersed in liquid. If device is
    run in damp conditions, wash with fresh water to eliminate dirt
    or corrosives, then fully dry unit.
Maximum suggested vehicle weight is 6.5lbs (2.95kg)