Traxxas 17T Pinion Gear 32P

This is a 17 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is attached straight to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

INCLUDES:
One 17 tooth Pinion Gear
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This gear is only one of 2 which are utilized on the E-Maxx double motor
    set-up.

Regularly purchased with the thing that you are currently reading about.

15T Pinion Gear 32P

This is a 15 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is attached straight to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

INCLUDES:
One 15 tooth Pinion Gear
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This gear is only one of 2 which are utilized on the E-Maxx double motor
    set-up.

Get this thing to boost the one you read about.

19T Pinion Gear 32P

This is a 19 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is attached straight to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

INCLUDES:
One 19 tooth Pinion Gear
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This gear is only one of 2 which are utilized on the E-Maxx double motor
    set-up.

Here is one more thing that compliments the thing being talked about.

Drive Hub, Center, Rear (1)/ F

This is the Front and Back Center Drive Hub Set for usage on the
Traxxas Slash 4x4 Vehicles.

FEATURES:
Nylon and steel building and construction

INCLUDES:
One Front Center Drive Hub
One Back Center Drive Hub
One Screw Pin

NEEDS:
Setup in drive assembly

Many others have purchased this thing together with the thing that you are currently reading about.

3 X 15Mm Button Hex Screw (6)

This is a bundle of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building and construction, Black in color
Utilized on the Traxxas Revo beast truck, can also be utilized in any
    application where a 3x15mm button head screw is required

INCLUDES:
Six 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Diameter: 3mm

This thing is regularly purchased with the above discussed thing.

Horn Bracket 4-40 3/32"

These are 3/32" EZ Change Horn Brackets for 4-40 Threads

FEATURES:
Nylon building and construction

INCLUDES:
Four horn brackets

NEEDS:
A rod with 4-40 threads

Here is a fantastic thing that several others have purchased the exact same time.



This is the Sidewinder SCT ESC and 3800kV Motor Combo from Castle Creations.

FEATURES:
Suitable for 2WD or 4WD brief course racing or backyard bashing
Neu-Castle 4 pole 1410 1Y motor has 50% more torque than Castle's
    CM36 series
Sidewinder SCT has 40% higher power handling than previous
    Sidewinder 1/10 scale ESC
Castle Link compatible (Field Link Portable Developer Vehicle Card
    (CSEM6300) required, not included)
Proportional brake with reverse lockout
Waterproof*

INCLUDES:
Castle Creations Sidewinder SCT ESC, 4mm Bullet Motor Connectors and
    Neu-Castle 4 pole 1410 1Y Brushless Motor, Guidelines

NEEDS:
Battery port of modeler's choice

SPECS:
ESC
Input Voltage: Optimum 2S LiPo
Brake: Proportional
Reversible: Yes, with lockout
Width: 1.48" (37.5mm)
Length: 1.93" (49mm)
Height: 1.18" (30mm)
Weight: 2.29oz (65g) without battery port
    Motor:
Pole Count: 4
Stator Lamination Density: 0.0078" .2mm
Bearings: CNC rated Japanese bearings
Measurements: 1.4 x 2.1" (36 x 53mm)
Shaft Diameter: 1/8" (3.2mm)

COMMENTS:
*Not planned for operation while immersed in liquid. If unit is
    run in wet conditions, wash with fresh water to eliminate dirt
    or corrosives, then totally dry unit.
Maximum recommended car weight is 6.5lbs (2.95kg)