JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Traxxas 13T Pinion Gear 32P (Traxxas 3943 | TRA3943)

Model: Traxxas 3943
Dist. #: TRA3943   SKU: TRA3943

Be the first to review this product. (Write Review)

Out of stock

Price:  $3.25

This item will earn you 3 reward point(s).
3 points = $0.06 off your next order. Learn More

Updated on Mar 28, 2024 05:34:56 PM

Pinion Gear 32P 13T E-Maxx...
This is a 13 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the equipment which is connected straight to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

CONSISTS OF:
One 13 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This equipment is just one of 2 which are used on the E-Maxx double motor
    set-up.

This product compliments the above talked about product.

54T 0.8 P Spur Gear

This is the 54 Tooth Spur Gear
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building
Black in color
.8 Module pitch

CONSISTS OF:
One 54T 0.8 Pitch Spur Gear

REQUIRES:
Assembly onto automobile

This product compliments the main item right here.

14T Pinion Gear 32P

This is a 14 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the equipment which is connected straight to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

CONSISTS OF:
One 14 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This equipment is just one of 2 which are used on the E-Maxx double motor
    set-up.

This is a amazing enhancement to the product currently being talked about.

12T Pinion Gear 32P

This is a 12 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the equipment which is connected straight to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

CONSISTS OF:
One 12 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This equipment is just one of 2 which are used on the E-Maxx double motor
    set-up.

Here is another product that compliments the product being talked about.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs just (No Wires).

FUNCTIONS:
Shrouded wire connections (no diminish tube needed)
Wide surface location, gold-plated terminals
Reverse polarity security makes it difficult to link in reverse
Textured surface for simple gripping
Compatible with high-current 12-gauge wire
Safe favorable locking spring loaded terminals for constant
    contact
Numerous locking barbs keep terminals secure

CONSISTS OF:
Two black male plastic connectors
Two sets of gold metal pins
Direction sheet

REQUIRES:
Soldering wires to the metal pins

You will certainly like this thing if you have the thing above pointed out.



This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Perfect for 1/10 scale car applications
Prewired with Traxxas high current connector

CONSISTS OF:
7.4V 5000mAh 25C Difficult Case LiPo Battery with Traxxas Plug

REQUIRES:
Balancer and LiPo compatible charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Score: 7.4V
Ranked Capacity: 5000mAh
Release Score: 25C continuous
Measurements: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Stabilizing Adapter: ElectriFly
Watt Hours: 37Wh

COMMENTS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER enable to Release below 2.5V per cell
NEVER disassemble or customize pack electrical wiring in any method or leak cells
NEVER place on flammable products or leave ignored throughout
    charging
ALWAYS Charge in a fire-resistant location
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g

Frequently Bought Together

Traxxas 13T Pinion Gear 32P
+
Traxxas 54T 0.8 P Spur Gear
+
Traxxas 12T Pinion Gear 32P
This Item: Traxxas 13T Pinion Gear 32P
$3.25
Traxxas 54T 0.8 P Spur Gear
$3.99
Traxxas 12T Pinion Gear 32P
$3.25

Total Price: $10.49

Add All Three To Cart

Customers who bought this product also purchased

Visual Parts Finder
";