JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Traxxas 13T Pinion Gear 32P (Traxxas 3943 | TRA3943)
Due to the impact of the COVID-19/Corona virus, there my be delays in the shipping estimates shown on our site.

We appreciate your understanding and support during these uncertain times.

Model: Traxxas 3943
Dist. #: TRA3943   SKU: TRA3943

Be the first to review this product. (Write Review)

Out of stock

Price:  $3.25

This item will earn you 3 reward point(s).
3 points = $0.06 off your next order. Learn More

Updated on Jan 29, 2022 06:01:19 AM

Pinion Gear 32P 13T E-Maxx...
This is a 13 Tooth 32 Pitch Pinion Equipment for the Traxxas E-Maxx Truck.
This is the equipment which is connected directly to the motor.

FEATURES:
Machined Steel
Created for a 3mm shaft

SUCHES AS:
One 13 tooth Pinion Equipment
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This equipment is only one of two which are utilized on the E-Maxx dual motor
    set-up.

This item praises the above discussed item.

54T 0.8 P Spur Gear

This is the 54 Tooth Spur Equipment
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon building
Black in color
.8 Module pitch

SUCHES AS:
One 54T 0.8 Pitch Spur Equipment

REQUIRES:
Assembly onto automobile

This item praises the main item right here.

14T Pinion Gear 32P

This is a 14 Tooth 32 Pitch Pinion Equipment for the Traxxas E-Maxx Truck.
This is the equipment which is connected directly to the motor.

FEATURES:
Machined Steel
Created for a 3mm shaft

SUCHES AS:
One 14 tooth Pinion Equipment
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This equipment is only one of two which are utilized on the E-Maxx dual motor
    set-up.

This is a fantastic addition to the item currently being discussed.

12T Pinion Gear 32P

This is a 12 Tooth 32 Pitch Pinion Equipment for the Traxxas E-Maxx Truck.
This is the equipment which is connected directly to the motor.

FEATURES:
Machined Steel
Created for a 3mm shaft

SUCHES AS:
One 12 tooth Pinion Equipment
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This equipment is only one of two which are utilized on the E-Maxx dual motor
    set-up.

Right here is another item that praises the item being discussed.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs only (No Wires).

FEATURES:
Shrouded wire connections (no diminish tube needed)
Wide surface area location, gold-plated terminals
Reverse polarity protection makes it impossible to connect in reverse
Textured surface area for easy gripping
Compatible with high-current 12-gauge wire
Protected favorable locking spring loaded terminals for consistent
    contact
Several locking barbs keep terminals secure

SUCHES AS:
Two black male plastic adapters
Two sets of gold metal pins
Guideline sheet

REQUIRES:
Soldering wires to the metal pins

You will like this thing if you have the thing previously stated.



This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Ideal for 1/10 scale vehicle applications
Prewired with Traxxas high current adapter

SUCHES AS:
7.4V 5000mAh 25C Tough Case LiPo Battery with Traxxas Plug

REQUIRES:
Balancer and LiPo suitable battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Rating: 7.4V
Rated Capacity: 5000mAh
Discharge Rating: 25C continuous
Dimensions: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Balancing Port: ElectriFly
Watt Hours: 37Wh

COMMENTS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER take apart or modify pack wiring in any way or leak cells
NEVER put on combustible products or leave ignored during
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of kids
All weights consist of wire leads and plugs
All weights +/- 1 g

Frequently Bought Together

Traxxas 13T Pinion Gear 32P
+
Traxxas 54T 0.8 P Spur Gear
+
Traxxas 12T Pinion Gear 32P
This Item: Traxxas 13T Pinion Gear 32P
$3.25
Traxxas 54T 0.8 P Spur Gear
$3.00
Traxxas 12T Pinion Gear 32P
$3.25

Total Price: $9.50

Add All Three To Cart

Customers who bought this product also purchased

Visual Parts Finder
";