JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Model: Traxxas 76054-1
Dist. #: TRAC50**   SKU: TRA76054-1

Be the first to review this product. (Write Review)

Out of stock

List Price:  $200.00
Price:  $129.95 & FREE SHIPPING
You Save:  $70.05 (35%)
Updated on Sep 22, 2017 03:55:09 PM

1/18 LaTrax Teton...
This is the Electric Powered, 2.4GHz Radio Controlled, 1/18 scale,
Ready to Run LaTrax Teton Monster Truck from Traxxas.

Chassis: Molded composite nylon monocoque
Drive: 4 wheel, steel center driveshaft
Differentials: Hardened steel bevel gear
Radio: 2.4GHz with 2-channel micro receiver,
    water resistant steering servo, and all weather condition electronic devices that allow
    driving through puddles, ice, slush, and more
Electronic Speed Control: Completely proportional forward, brake, reverse,
    programmbale with 3 drive profiles, Sport, Race and Training
    Mode, two-stage low-voltage detection for optional LiPo battery
Motor: 370 size brushed
Battery: 2/3A 6-cell, 7.2V, 1200mAh NiMH, with Requirement connector
Battery Battery charger: 2A DC powered
Suspension: Completely independent
Shocks: Oil filled plastic body, coil over
Body: ProGraphix Completely painted with decals applied
Steering: 2 bellcranks on chassis to multiply the speed of the
    servo, and provide accurate geometry for the steering angle of each
Ball Bearings: Full set included
Front and Rear Bumpers: Plastic
Tires: Rubber, off-road tread
Wheels: 5 spoke 1.63" (41mm) diameter

RTR LaTrax Teton Monster Truck, with Motor, 2.4GHz Radio, ESC, NiMH
    Battery, Battery charger, 4 AA Batteries, Instruction Manual, 10T Pinion
    Gear, 60T Spur Gear

Length: 10.16" (258mm)
Front Track: 4.17" (106mm)
Rear Track: 4.23" (107.5mm)
Weight: 19.2oz (55g) with battery
Weight: 13.3oz (43g) without battery
Height: 4.65" (118mm)
Wheelbase: 6.44" (163.5mm)
Shock Length: 2.36" (60mm)
Ground Clearance: 1.18" (30mm)
Internal Gear Ratio: 2.5:1
General Drive Ratio: 15:1 stock
Battery Tray Dimensions: 4 x 1.4 x 0.71" (102 x 35 x 18mm)
Length: 9.4" (239mm)
Width: 3.6" (91mm)
Height: 3.3" (84mm)

Available in the following body colors;
    Blue, TRAC50BB Orange, TRAC50NN
    Green, TRAC50GG Red, TRAC50RR

If replacement ball bearings are needed, Traxxas provides the
    7541X, Latrax Ball Bearing Set TRAC9804, that changes all the
    ball bearings.

The listed below product also pairs truly well with the product being talked about.

Ac To Dc Adapter

This is the Traxxas A/C to DC Power Supply Adapter.

Created specifically for usage with the Traxxas peak detecting DC
    2-4A quick battery chargers and enables them to be powered from a conventional
    110V A/C outlet
No on/off switch, plug into turn on and disconnect to shut off, disconnect
    when not in usage

Traxxas A/C to DC Power Supply Adapter with 110 Power Cord and 12V
    Output Cord with Socket

Input 100 - 240V A/C, 50-60Hz, 1.0A
Output: 13.8V, 3.5A

For dry places and indoor usage only. Do not expose to moisture.
Do closed case, danger of electrical shock.

This product praises the above talked about product.

Battery 6-Cell Nimh W/Molex (Fits Latrax 1/18 Models)

This is the Traxxas 6-Cell 1200mAH NiMH Battery with Molex Connector.

Fits the 1/18 scale Traxxas Latrax Rally Vehicle and other 1/18 scale
Wire lead and Molex connector

6-Cell 1200mAH NiMH Battery with Molex Adapter

NiMH suitable battery charger such as Duratrax Onyx 100, DTXP4190

Measurements: 1.3 x 0.51 x 3.6" (34 x 13 x 91mm)

Battery battery charger provided with the Latrax Rally car is only for 5-cell

Frequently Bought Together

Traxxas 1/18 LaTrax Teton
Traxxas Battery 6-Cell Nimh W/Molex (Fits Latrax 1/18 Models)
Traxxas Ac To Dc Adapter
This Item: Traxxas 1/18 LaTrax Teton
Traxxas Battery 6-Cell Nimh W/Molex (Fits Latrax 1/18 Models)
Traxxas Ac To Dc Adapter

Total Price: $173.89

Add All Three To Cart
Visual Parts Finder
What's New?