JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

1/16 Summit VXL (Traxxas 72076-3 | TRA72076-3)

Model: Traxxas 72076-3
Dist. #: TRA72076-3   SKU: TRA72076-3

Be the first to review this product. (Write Review)

Out of stock

Price:  $369.95

This item will earn you 370 reward point(s).
370 points = $7.40 off your next order. Learn More

Updated on May 27, 2025 06:26:44 AM

1/16 Summit VXL TQ 2.4GHz TSM...
This is the brushless electrical powered, 2.4GHz radio managed, ready to run
1/16 scale Traxxas Summit VXL Beast Truck with Traxxas Stability Management.

**The consisted of TQ 2.4GHz radio system is compatible just with the**
**#6519 receiver and does DECLINE the Docking Base accessory.**

FUNCTIONS:
Traxxas Stability Management (TSM): Superior tuning algorithms work on
    high-speed electronic components to control wheel spin and steering
    direction on loose dirt, concrete as well as ice and snow. TSM can be
    fine tuned or shut off by changing the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Nylon composite construction 0.08" (2mm) thick monocoque
    type
Drive: 4 wheel
Radio: Traxxas TQ 2.4GHz high output with Traxxas Link automated
    design acknowledgment, and water resistant micro steering servo
Electronic Speed Control: Traxxas VXL-3m water resistant, with high-
    existing port, training mode, reverse and low voltage
    detection for use with TWO and THREE LiPo loads
Motor: Traxxas Velineon 380 brushless, 8 turn 4000kV with Neodymium
    magnets, sintered rotor and high RPM ball bearings, 3.5mm gold
    plated bullet connectors
Stimulate Equipment: 45 tooth
Pinion Equipment: 16 tooth 48 pitch
Battery: One Traxxas Power Cell 1200mAh 6-cell NiMH w/high existing
    port, and iD Car Battery Identification that permits Traxxas
    iD geared up chargers to immediately set and optimize charge
    settings
    dual NiMH battery ability (additional battery and series adapter not
    consisted of and should be purchased individually)
    Lorry is also suitable with one TWO or THREE LiPo pack (not
    consisted of) LiPo mode on ESC should be chosen.
    **NOTE the ESC and motor CANNOT manage dual LiPos, if using dual
    batteries, both should be NiMH.**
Battery Charger: 2 amp DC powered quick charger
Body: Painted and cut with used decals
Bumpers: Front and back, composite construction
Shocks: GTR oil filled
Suspension: Revo-spec rocker actuated long travel inboard type with
    telescoping universal joint shafts
Transmission: Single speed ball bearing geared up with adjustable
    slipper clutch
Differentials: Sealed silicone filled planetary steel bevel equipments
Ball Bearings: Rubber sealed
Caster: Non-adjustable
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind automobile
Tires: Multi surface, with big angular lugs and foam inserts
Wheels: 2.2" (56mm) diameter Geode, chrome surface with painted
    beadlock style rims, standard size 12mm hex
Steering: Bellcrank with spring crammed servo protection

CONSISTS OF:
RTR Traxxas Summit VXL Beast Truck with TQ 2.4GHz 2-ch radio, TSM,
    micro steering servo, ESC, painted body, 6-cell battery,
    charger, brushless motor and instruction manual

NEEDS:
AA Cells: 4 for transmitter

SPECS:
Lorry-
Length: 12.6" (320mm)
Height: 7.48" (190mm)
Front Track: 10.43" (265mm)
Rear Track: 10.63" (270mm) distance in between outer edges of wheels
    side-to-side
Weight: 44oz (1.24kg)
Wheelbase: 8.425" (214mm)
Ground Clearance: 2.75" (70mm)
Internal Equipment Ratio: 5.04:1 (reversed input: 9.72:1)
Total Drive Ratio: 15.75 (stock, from box)
    Body-
Length: 11.4" (291mm)
Width: 5" (127mm)
Height: 3.6" (92mm) measured at light bar

COMMENTS:
If wishing to upgrade to a battery with a somewhat higher mAh score,
    the DuraTrax 1600mAh NiMH 7.2V 6-Cell Battery (DTXC2192) is an
    ideal choice.

The ball bearings in the Traxxas Summit VXL are rubber sealed.
Following are the stock numbers for the replacement bearings from
    Traxxas and non-rubber sealed alternatives from Duratrax;
    Qty. Size Place Qty. Bearing Set
2 8x12mm Fr Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Fr Hubs 1 TRAC7019 DTXC1511
2 8x12mm Back Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Rear Hubs 1 TRAC7019 DTXC1511
2 5x8mm Steering Bellcrank 1 DTXC1523
2 4x7mm Rocker Arm Post 2 DTXC1507
4 8x12mm Differentials 2 TRAC7020 DTXC1581
4 4x8mm Differentials 2 TRAC7019 DTXC1511
6 4x8mm Transmission 3 TRAC7019 DTXC1511
2 4x8mm Rear Ring Equipment 1 TRAC7019 DTXC1511

    Available in the following body colors;
Blue, TRAD66BB Red, TRAD66RR
White, TRAD66WW Yellow, TRAD66YY

Trends
#1/16SummitVXL
#Traxxas1/16SummitVXL

X-Plosion Parts Finder Click Below For Parts Explosions For 1/16 Summit VXL

Frequently Bought Together

Traxxas 1/16 Summit VXL TQ 2.4GHz TSM
+
Traxxas 1/16 E-Revo Wheelie Bar
This Item: Traxxas 1/16 Summit VXL TQ 2.4GHz TSM
$369.95
Traxxas 1/16 E-Revo Wheelie Bar
$15.49

Total Price: $385.44

Add Both To Cart

Frequently Purchased 1/16 Summit VXL Parts

Visual Parts Finder