JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

1/16 Summit VXL (Traxxas 72076-3 | TRA72076-3)

Model: Traxxas 72076-3
Dist. #: TRA72076-3   SKU: TRA72076-3

Be the first to review this product. (Write Review)

Out of stock

Price:  $369.95

This item will earn you 370 reward point(s).
370 points = $7.40 off your next order. Learn More

Updated on May 19, 2025 02:11:46 PM

1/16 Summit VXL TQ 2.4GHz TSM...
This is the brushless electric powered, 2.4GHz radio managed, prepared to run
1/16 scale Traxxas Top VXL Monster Truck with Traxxas Stability Management.

**The included TQ 2.4GHz radio system is compatible only with the**
**#6519 receiver and does NOT accept the Docking Base accessory.**

FUNCTIONS:
Traxxas Stability Management (TSM): Superior tuning algorithms work on
    high-speed electronic components to manage wheel spin and steering
    instructions on loose dirt, concrete as well as ice and snow. TSM can be
    tweaked or switched off by adjusting the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Nylon composite building and construction 0.08" (2mm) thick monocoque
    type
Own: 4 wheel
Radio: Traxxas TQ 2.4GHz high output with Traxxas Link automated
    design recognition, and waterproof micro steering servo
Electronic Speed Control: Traxxas VXL-3m waterproof, with high-
    present port, training mode, reverse and low voltage
    detection for usage with 2S and THREE LiPo packs
Motor: Traxxas Velineon 380 brushless, 8 turn 4000kV with Neodymium
    magnets, sintered rotor and high RPM ball bearings, 3.5mm gold
    plated bullet ports
Spur Equipment: 45 tooth
Pinion Equipment: 16 tooth 48 pitch
Battery: One Traxxas Power Cell 1200mAh 6-cell NiMH w/high present
    port, and iD Automobile Battery Recognition that allows Traxxas
    iD equipped battery chargers to immediately set and optimize charge
    settings
    dual NiMH battery ability (additional battery and series adapter not
    included and need to be purchased separately)
    Lorry is also suitable with one 2S or THREE LiPo pack (not
    included) LiPo mode on ESC need to be chosen.
    **KEEP IN MIND the ESC and motor CANNOT manage dual LiPos, if utilizing dual
    batteries, both need to be NiMH.**
Battery Charger: 2 amp DC powered fast battery charger
Body: Painted and cut with used decals
Bumpers: Front and back, composite building and construction
Shocks: GTR oil filled
Suspension: Revo-spec rocker actuated long travel inboard type with
    telescoping universal joint shafts
Transmission: Single speed ball bearing equipped with adjustable
    slipper clutch
Differentials: Sealed silicone filled planetary steel bevel gears
Ball Bearings: Rubber sealed
Caster: Non-adjustable
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind lorry
Tires: Multi surface, with big angular lugs and foam inserts
Wheels: 2.2" (56mm) size Geode, chrome surface with painted
    beadlock design rims, basic size 12mm hex
Steering: Bellcrank with spring packed servo protection

INCLUDES:
RTR Traxxas Top VXL Monster Truck with TQ 2.4GHz 2-ch radio, TSM,
    micro steering servo, ESC, painted body, 6-cell battery,
    battery charger, brushless motor and instruction manual

REQUIRES:
AA Cells: 4 for transmitter

SPECIFICATIONS:
Lorry-
Length: 12.6" (320mm)
Height: 7.48" (190mm)
Front Track: 10.43" (265mm)
Rear Track: 10.63" (270mm) range in between external edges of wheels
    side-to-side
Weight: 44oz (1.24kg)
Wheelbase: 8.425" (214mm)
Ground Clearance: 2.75" (70mm)
Internal Equipment Ratio: 5.04:1 (reversed input: 9.72:1)
Total Drive Ratio: 15.75 (stock, from box)
    Body-
Length: 11.4" (291mm)
Width: 5" (127mm)
Height: 3.6" (92mm) measured at light bar

REMARKS:
If wishing to update to a battery with a somewhat greater mAh score,
    the DuraTrax 1600mAh NiMH 7.2V 6-Cell Battery (DTXC2192) is an
    ideal choice.

The ball bearings in the Traxxas Top VXL are rubber sealed.
Following are the stock numbers for the replacement bearings from
    Traxxas and non-rubber sealed options from Duratrax;
    Qty. Size Location Qty. Bearing Set
2 8x12mm Fr Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Fr Hubs 1 TRAC7019 DTXC1511
2 8x12mm Rear Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Rear Hubs 1 TRAC7019 DTXC1511
2 5x8mm Steering Bellcrank 1 DTXC1523
2 4x7mm Rocker Arm Post 2 DTXC1507
4 8x12mm Differentials 2 TRAC7020 DTXC1581
4 4x8mm Differentials 2 TRAC7019 DTXC1511
6 4x8mm Transmission 3 TRAC7019 DTXC1511
2 4x8mm Rear Ring Equipment 1 TRAC7019 DTXC1511

    Available in the following body colors;
Blue, TRAD66BB Red, TRAD66RR
White, TRAD66WW Yellow, TRAD66YY

Trends
#1/16SummitVXL
#Traxxas1/16SummitVXL

X-Plosion Parts Finder Click Below For Parts Explosions For 1/16 Summit VXL

Frequently Bought Together

Traxxas 1/16 Summit VXL TQ 2.4GHz TSM
+
Traxxas 1/16 E-Revo Wheelie Bar
This Item: Traxxas 1/16 Summit VXL TQ 2.4GHz TSM
$369.95
Traxxas 1/16 E-Revo Wheelie Bar
$15.49

Total Price: $385.44

Add Both To Cart

Frequently Purchased 1/16 Summit VXL Parts

Visual Parts Finder