Traxxas 1/16 E-Revo Wheelie Bar

This is the Wheelie Bar for the Traxxas 1/16 scale E-Revo.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Wheelie Bar
One 2x14mm Cap Head Screws
Two 2x8mm Cap Head Screws
Direction Sheet

REQUIRES:
Setup at back of chassis

Want an additional great product to enhance the above stated product?



This is the Duratrax 19-in-1 Tool Set for Traxxas Vehicles.

FEATURES:
All tools needed for routine maintenance on over a dozen of the
    most popular Traxxas cars along with numerous other RC cars
Nut motorists, hex motorists, screwdrivers and turnbuckle wrench in
    multiple sizes
Ergonomic cog handle
Adjustable bit length
Black nylon zippered bring case with Duratrax logo design

INCLUDES:
4, 5, 5.5, 7 and 8mm Nut Drivers
1.5, 2, 2.5, 3, 3.5, and 4mm Hex Drivers
#0, #00, #1 Phillips Screwdrivers
2, 3, and 4mm Slotted Head Screwrivers
5, 8mm Turnbuckle Wrench
Cog Handle

Many others have acquired this product along with the product that you are presently reviewing.

Body Clip 90 Deg Angled (10) Revo

These are the replacement Body Clips for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Metal Construction
Silver in Color
Bent for Easy Elimination

INCLUDES:
Ten Bent Silver Metal Body Clips

REQUIRES:
Assembly onto Automobile

Below is an additional product that compliments the product being gone over.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Equipment for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction

INCLUDES:
One Diff Ring Equipment
One Pinion Equipment

REQUIRES:
Setup on the car

Regularly acquired with the product that you are presently reviewing.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Ideal for 1/16 scale vehicle applications
Prewired with Traxxas high present adapter

INCLUDES:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Adapter

REQUIRES:
Balancer and LiPo compatible charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Score: 11.1V
Rated Capability: 1300mAh
Discharge Score: 25C constant
Measurements: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Stabilizing Adapter: ElectriFly
Watt Hours: 14Wh

COMMENTS:
ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER allow to Discharge listed below 2.5V per cell
NEVER dismantle or customize pack electrical wiring in any way or puncture cells
NEVER place on flammable materials or leave unattended during
    charging
ALWAYS Charge in a fireproof place
ALWAYS set charger's output volts to match battery volts
ALWAYS stay out of reach of kids
All weights consist of wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm