Traxxas 1/16 E-Revo Wheelie Bar

This is the Wheelie Bar for the Traxxas 1/16 scale E-Revo.

FUNCTIONS:
Nylon building and construction
Black in color

CONSISTS OF:
One Wheelie Bar
One 2x14mm Cap Head Screws
Two 2x8mm Cap Head Screws
Instruction Sheet

REQUIRES:
Setup at rear of chassis

Want one more terrific item to compliment the above pointed out item?



This is the Duratrax 19-in-1 Tool Set for Traxxas Vehicles.

FEATURES:
All tools needed for routine maintenance on over a lots of the
    most popular Traxxas vehicles as well as numerous other RC vehicles
Nut motorists, hex motorists, screwdrivers and turnbuckle wrench in
    several sizes
Ergonomic ratchet deal with
Adjustable bit length
Black nylon zippered bring case with Duratrax logo

CONSISTS OF:
4, 5, 5.5, 7 and 8mm Nut Motorists
1.5, 2, 2.5, 3, 3.5, and 4mm Hex Drivers
#0, #00, #1 Phillips Screwdrivers
2, 3, and 4mm Slotted Head Screwrivers
5, 8mm Turnbuckle Wrench
Ratchet Handle

Lots of others have actually bought this item along with the item that you are presently checking out.

Body Clip 90 Deg Angled (10) Revo

These are the replacement Body Clips for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Metal Building and construction
Silver in Color
Bent for Easy Elimination

CONSISTS OF:
10 Bent Silver Metal Body Clips

REQUIRES:
Assembly onto Automobile

Here is one more item that praises the item being reviewed.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Equipment for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction

CONSISTS OF:
One Diff Ring Equipment
One Pinion Equipment

REQUIRES:
Setup on the car

Regularly bought with the item that you are presently checking out.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Perfect for 1/16 scale vehicle applications
Prewired with Traxxas high present adapter

CONSISTS OF:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Adapter

REQUIRES:
Balancer and LiPo compatible charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Score: 11.1V
Ranked Capability: 1300mAh
Discharge Score: 25C continuous
Dimensions: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Stabilizing Adapter: ElectriFly
Watt Hours: 14Wh

REMARKS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER permit to Discharge below 2.5V per cell
NEVER dismantle or customize pack circuitry in any way or puncture cells
NEVER place on combustible products or leave unattended during
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children
All weights such as wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm