Traxxas 1/16 E-Revo Wheelie Bar

This is the Wheelie Bar for the Traxxas 1/16 scale E-Revo.

FEATURES:
Nylon construction
Black in color

SUCHES AS:
One Wheelie Bar
One 2x14mm Cap Head Screws
Two 2x8mm Cap Head Screws
Instruction Sheet

REQUIRES:
Setup at rear of chassis

Want another fantastic product to compliment the above mentioned product?



This is the Duratrax 19-in-1 Tool Set for Traxxas Vehicles.

FEATURES:
All tools needed for regular maintenance on over a lots of the
    most popular Traxxas cars as well as numerous other RC cars
Nut motorists, hex motorists, screwdrivers and turnbuckle wrench in
    multiple sizes
Ergonomic cog manage
Adjustable bit length
Black nylon zippered bring case with Duratrax logo

SUCHES AS:
4, 5, 5.5, 7 and 8mm Nut Drivers
1.5, 2, 2.5, 3, 3.5, and 4mm Hex Drivers
#0, #00, #1 Phillips Screwdrivers
2, 3, and 4mm Slotted Head Screwrivers
5, 8mm Turnbuckle Wrench
Cog Deal with

Numerous others have acquired this product along with the product that you are currently reviewing.

Body Clip 90 Deg Angled (10) Revo

These are the replacement Body Clips for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Metal Building and construction
Silver in Color
Bent for Easy Removal

SUCHES AS:
Ten Bent Silver Metal Body Clips

REQUIRES:
Assembly onto Automobile

Right here is another product that praises the product being gone over.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel construction

SUCHES AS:
One Diff Ring Gear
One Pinion Gear

REQUIRES:
Setup on the automobile

Regularly acquired with the product that you are currently reviewing.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Suitable for 1/16 scale vehicle applications
Prewired with Traxxas high current port

SUCHES AS:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Adapter

REQUIRES:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Score: 11.1V
Ranked Capacity: 1300mAh
Discharge Score: 25C constant
Measurements: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Balancing Adapter: ElectriFly
Watt Hours: 14Wh

REMARKS:
ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER permit to Discharge below 2.5V per cell
NEVER disassemble or customize pack wiring in any way or leak cells
NEVER place on flammable products or leave unattended throughout
    charging
ALWAYS Charge in a fireproof area
ALWAYS set charger's output volts to match battery volts
CONSTANTLY stay out of reach of children
All weights such as wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm